Bmw x1 brake blades were quoted as follows:
The cost of replacing the front brakes is usually around $1,100, plus approximately $1,300 for working hours. The price of the whole set of original brakes (including front and back wheels) is around $650. The price of brakes before and after imports varied between $600 and $700, although there might be some variation by type. The price of national brakes does not exceed $500。
The replacement of brake plates depends on a number of factors. For example, the brake blades should be replaced in a timely manner when the thickness is less than the limit value of 3 mm or when the sensor alert is required. In general, it is recommended that brake blades should be replaced if more than 80,000 kilometres are travelled, and that timely replacement should also be considered if friction is heard on the wheel. In addition, the thickness of brake blades is a key indicator, generally ranging from 1. 5 to 2. 0 cm, and replacement should be considered when the remaining thickness is only one third, or about 0. 5 mm。
During normal travel, it is recommended that the brake foot and foot be checked once for 5,000 kilometres each, including the remaining thickness, wear and tear, whether the wear and tear on both sides are the same, and whether it is free to return. Some vehicles have brake hoof alerts, and when the wear and tear limit is reached, the instrument calls the alarm, and the brakes must be replaced。
In replacing brake blades, the brakes of the original plant parts should be selected to ensure optimal brake effect and minimal wear and tear. For example, a female driver chose the galfer brake, which was cheaper than shop 4s, assigned the contractor to install the package, paid $50 for the late brake to decode the electronic brake, and no additional costs for the front brake. The goods arrived on the next day after the order was installed successfully and the entire process took about half an hour and was used well。
The selection of particularly low-cost brakes is not recommended, as the faster the cost of the brakes is worn, the better quality of brakes is recommended for safety reasons。
The original brands of the bmw x1 brakes are ate, brembo and the official recommended brands include ferrodo, unisys, tamington, mintais, wagner and trw. The original bmw 535i brake brand is horneville. The supplier of brakes from the bmw x1 plant was the german continental group。
In selecting brakes for bmw x1, the following points should be taken into account: first, materials, mainly ceramics, semi-metals and asbestos brakes in the market three types of plates, the bmw x1 plant, used ceramic brakes with good brake performance, low noise and low wear. The second is the model, with different types of brakes, which must be suitable for bmw x1. Next is the date of production, which usually lasts for 20,000 to 40,000 km, with as many new brakes as possible to ensure performance and quality。
The original plant spare parts for the front and back brakes are about $600-700, and the price for the national brakes is higher, generally not exceeding $500. The length of service upon replacement is charged separately。
High-quality brake blades should be characterized by stable friction factors, good brake efficiency, long lifespan, low noise, good comfort, moderate heat inflation, controlled heat decline, moderate compressability, wear balance and environmental protection. The selection of well-known brands, as recommended above, ensures the reliability and safety of vehicle brake systems。
