The absence of wireless networks is often encountered outside the home. In the out-of-office and drive-by, tablets and notebooks do not even go online and many people are helpless. Many people think that they can only buy their own wifi equipment and spend extra money。
Actually, we have a cell phone with our own network. No additional spare parts, no software installation. It is only that most people are not set right, either hotphones are hot and hot, or strangers are secretly connected and traffic is running away。
As long as the setup is right, the network can be shared whenever you go。
I. 90% of usersCell phones are hotIt's four faults
Error one: unset passwords for direct sharing after opening hot spots
Normal operation: opens a person's hotspot without setting a password to connect the device directly。
Immediate problems: other equipment can be quickly connected to the network。
Long-term invisibility, people around can find this hot spot, strangers sneaking around. Large amounts of traffic are consumed and mobile phones continue to be overloaded, power-consuming and hot。
Miss 2: hot spots run out, manual shutdowns often forget
Normal operation: direct lock screens without manually turning off the hotspot switch after the hotspot。
Instant problem: screens are out, no hot spots are still running。
Long-term invisibility hazard: hotspots continue to transmit signals and electricity continues to consume. Once people are connected again, the flow continues to be withheld without knowledge。
Error area three: multiple devices connected at the same time without limiting the number of connections
Normal operations: tablets, computers, and other mobile phones are connected without quantitative restrictions。
Immediate problem: multiple devices are also online。
Long-term invisibility hazards, overloading of mobile phones, cyber cartons, severe fever. Cellular power is falling rapidly, and there is even a breakdown of the network and automatic failure of hot spots。
Miss four: turn on the hot spot, and turn on the power-saving mode
Regular operations: i'm worried about electricity consumption while turning on hot spots and using mobile phones to save electricity。
Immediate problem: cell phone alert to save power。
Long-term invisibility hazards: power-saving models limit mobile phone network performance, hot spots are frequently cut off, networks are intermittent and not used properly。
Two: sitter three-step exercise, set up a cell phone hot spot, andromeda general
Step one: accurate functionality portal, little white lost
1. Open cell phone desktop [setout]
2. Find [mobile network] or [connect and share], click in
3. Find [personal hotspots] and enter the hotspot configuration page; it can also go down directly from the top of the screen, move out of the control centre and quickly enter the settings by long hotspot icons。
Step 2: 2 core functional functions, interpretation of fixed operations
1. Hotspot name and password configuration
Word interpretation: set an exclusive name and password, and only those who know the password can connect to your network and prevent outsiders from gabbing。
Fixed operation: hotspot name sets alphanumeric combinations, password sets for eight or more characters plus numbers。
Practical effects: strangers around the perimeter are not able to access hot spots at random, traffic is not compromised and network use is safer。
2. Unequipped connection, automatically closing hot spots over time
White words explain that when there is no device attached to hot spots, waiting for a fixed time, the hot spots are automatically turned off without manual operation。
Fixed operation: start automatic timeout and wait for 5 minutes。
Physical effects: forgetting to turn off hot spots does not worry, five minutes without equipment connection, the hot spots automatically stop, and save power and traffic。
Step 3: hidden support settings that must be turned on and off
Set maximum number of connectors with a fixed ceiling of 3 to avoid over-equipment resulting in katunfa hot
It's more compatible with hot-spot option 2. 4g. Old tablets and old equipment can find hot spots
Turning off cell phones and power-saving models while turning on hot spots
Open the flow alert, when the defined flow level is reached, receive a reminder to avoid over-exhaustion
Iii. Five-high frequency scener setup, brainless
1. Outside the office scene
Fixed parameters: password 8-bit characters, maximum connection of 2 devices, automatic closure of 5 minutes, frequency segment 2. 4g, and closure of the power-saving mode。
Operational points: the notebook connects the hot spots, maintains only one computer network, and the equipment used is disconnected in a timely manner。
Practical effects: office files, web pages are stable, networks are difficult to break down and cellular fever is significantly reduced。
2. Travel entertainment scenes
Fixed parameters: password 8-bit characters, maximum connection 2 and automatic closure 5 minutes。
Operational points: short video brushes minimize video clarity and reduce traffic consumption。
Practical effects: a tablet view of video can be connected normally and does not result in network carton being used simultaneously for multiple devices。
3. Re-launching of the electric zone
Fixed parameters: 5 minutes to shut down, to allow access to up to two devices, and to shut down the power-saving mode。
Operational points: cell phone plugs with chargers use hot spots and screens are down。
Practical effects: when hot spots continue to be used, the speed of electricity consumption becomes slower and mobile phones do not lose power quickly。
4. Privacy scenes
Fixed parameters: set a high-intensity password, connect to a maximum of two, and view regularly the list of connected devices。
Operational points: unknown devices are connected, directly blacklisted。
Physical effects, which can be directly intercepted and protect traffic and personal network security once unknown equipment is attempted to connect。
5. Network flow optimization
Fixed parameters: the frequency band selects 2. 4g, with a maximum of three devices, and shuts down the power-saving mode。
Operational elements: prior to the opening of the hotspot, confirm that the mobile phone itself is stable。
Realistic effects, stable network signals, less frequent disconnections and more smooth internet access experience。
Iv. 3 small-point techniques + bottom line for start-up operations + summary of steps
3 practical plus-point techniques
1. When using only one device to access the internet, it is possible to choose the usb shared network, which is more energy-efficient and less heat-producing than wireless hot spots。
2. After each other has exhausted the hotspot, the password of the hotspot can be directly modified to prevent automatic subsequent connection。
3. On the hotspot page, the equipment being connected is viewed at all times, unknown equipment is found and is cut off directly。
New hands are strictly off-limits to touch
1. Do not set open hotspots without passwords, which can easily be gagged by strangers in the vicinity, and consume traffic in large quantities。
2. No one-time access to more than four units, excessive equipment, network cartons, and severe hotting of hands。
3. Do not open hot spots in power-saving mode for long periods of time, and the network is frequently cut off to influence use。
4. Do not open hot spots in areas where cell phone signals are poor for long periods of time, and weak signals can exacerbate electrical heat consumption。
Elements of full core memory
1. The hot spots must be password-set and automatically shut without connection for five minutes。
2. The upper limit of the connection equipment is within three stations and the power-saving mode is closed when hot spots are used。
3. Priority is given to 2. 4g bands, which make it easier for older equipment to find hot spots。
4. Regular observation of connection equipment and timely blacking of unknown equipment to avoid misappropriation of traffic。
Let's wrap it up
Many people go out without wifi, and the first reaction is to buy the internet equipment and spend extra money。
Personal hotspots with cell phones are free of charge networks. It is just that many people don't have the facilities to do it, and they often have problems with electricity consumption, net-wipes, network cartons。
Following the steps above, access to the network is readily available, regardless of computer or tablet. One-time settings, easy to follow。
It is recommended that the collection be kept for reference when there is no wireless network on the way out。
Have you used your mobile phones on your way out? Have you ever seen traffic slip off
Disclaimer: this is a zero-basic, zero-basic, personal hotspot for mobile phones, with slightly different names for different mobile phone system menus. The opening of personal hotspots consumes mobile mobile cellular traffic at a specific cost to the consulting operator; the opening of hotspots over a long period of time accelerates the consumption of electricity and the use of cellular heat in high temperatures。
