Many people use mobile phones for their own personal hotspots. Without the need to buy extra side-to-side wifi equipment, the internet is available to computers, tablets and other mobile phones. However, many people are simply turning on the switch, and are confronted with the problem of the speed of cartons, frequent disconnections, burning of electric power, squeezing of traffic, and squeezing of the net by strangers. Most of the malfunctions were not the damage to mobile hardware, but the failure to match the hotspot infrastructure. Many ordinary users only know how to turn on the heat switch, and the key options of frequency bands, encryption, connection limitations, automatic closure are completely ignored and the actual usage experience is significantly compromised. TodayCell phones are hotThe whole set of gyms, the main points of the pitFault checkZero-based operations, with complete clarity, can stabilize cell phones。
First, the base is open, not just the switch
A lot of people do it: pull down the control center, light hot icons and finish it. This is the least expensive but also the most dangerous use. When the hotspot is opened, priority is given to checking the three base configurations, with a slight difference between android and applephone operating paths。
Anjo universal path: open settings, enter connections and share, find personal hot spots/wlan hotspots, do not directly turn on switches, first set the hotspots。
Universal path to apple cellular: set up, cellular network, personal hotspots, change passwords before opening to allow others to join。
1. Modify hotspot name, do not use system default name
The name of the plant's own device, such as “xx mobile phone”, should not be used directly. The default name will expose the cell phone model, and public spaces will be easily identified, increasing the probability of being targeted for breaking the net。
Realistic: hotspot names are combined in english only and no chinese, special emoticons are added. Some of the old smart devices do not recognize chinese hot calls, and there are cases where hot spots are not found and connections fail。
2. Set a high-intensity password and reject simple passwords
The minimum heat password suggests 12 bits and above, mixed case letters + numbers, and as much as possible a simple symbol. Simple passwords such as 12345678, 888888 are prohibited。
In a public environment, simple passwords can be broken in a short period of time, people connect to your hot spots, consume your mobile phone traffic, and there are data security risks。
Small tip: the password is too complex not to rememberHotspot settingsPage password, copy the input。
3. Prefer wpa2-personal or wpa3 by encryption
Hotspot security encryption option, with conditions to give preference to wpa3 and old device compatibility option wpa2-personal. Do not choose open unencrypted mode. Once it's open, anyone around the perimeter can access your hotspot, without any verification. The old wep encryption protocol is not safe, and the cell phone is now largely out of control and does not choose this option manually。
Once the above three steps have been completed and the heat switch has been turned on, the basic security configuration will be completed。
Ii. Selection of ap frequency: slow internet speed, lack of access to equipment, mostly wrong here
This is a setup that is completely unknown to the vast majority of ordinary users and is the central reason why hot-spot cardon, equipment, cannot be connected. Cellular hot spots are divided into 2. 4 ghz bands and 5 ghz bands, each of which is superior, not absolute good or bad, toggle as required。
- 5ghz bands: high internet speed cap, low interference and low delay. The faulty signal is broken through the wall and the signal decays significantly a little further away. New devices, such as mobile phones, notebooks, close office, video-painting, downloading documents。
- 2. 4ghz bands: low transmission speed and prone to interference with surrounding signals. Advantage signals spread far away and have a strong ability to penetrate walls. Suitable for old tablets, smart devices, which are used far away from mobile phones。
Physically: anzor cell phones enter individual hotspots, click on more shared settings, find ap frequency bands to manually switch 2. 4ghz or 5ghz。
An apple cell phone does not have the option to manually switch frequency bands, and the system automatically adapts the frequency bands to the access device。
Practical scene reference:
1. The laptop operates in hot spots, with two devices coming together and switching to 5ghz, which is more fluid。
2. The problem of compatibility is largely resolved by changing the ap frequency band to 2. 4 ghz, where no hot spots can be found by old smart devices。
3. Multiple devices are scattered and located further away from mobile phones, giving priority to 2. 4 ghz。
Error correction: 5ghz is not equal to 5g mobile phone network, this is wifi signal frequency, and mobile phone use of 5g cellular traffic is two sets of concepts, without confusion。
Iii. Limiting the number of connected devices and controlling unfamiliarity network
Cellular hotspots support simultaneous access to multiple devices, most of which have a maximum of eight simultaneous connections. Not as much equipment as possible. The speed of the mobile phone network is distributed for every additional device connected, while the load of the processor is increased and power consumption and heat rises simultaneously。
Practising skills:
1. The maximum number of connections in hotspot settings is found and used by individuals on a daily basis, and it is proposed to limit 2-4 to no maximum。
2. Turn on the list of connected devices to view the functionality and see which equipment is using hot spots at any time. Once an unknown device is found to be connected, the device is hacked and the password of the hot spot is changed simultaneously。
3. Do not share hot code with strangers in public. All the traffic that comes from someone else's access will consume your phone set。
Many users encountered a sudden drop in the speed of the hotspot network, which ruled out the operator's signal, presumably at the rate of an unknown device sneaking through the bandwidth. It is a necessary habit to view the list regularly。
Iv. Solving the high power consumption in hot spots and optimizing the severe fever of mobile phones
Turning on hot spots is a high-load working state for mobile phones, and heat consumption is normal, but it is very rapid to lose power, to burn hands, and mostly to set up and use。
1. Turning off unconnected hotspots automatically
The vast majority of mobile phone hotspots set pages and automatically shut down the hotspots with no device attached to them. Set 1-5 minutes timeout。
Many people used the hot spots to lock the screen and forgot to close it manually. The hotspots continue to launch wifi signals and to consume electricity. The system automatically shuts down the hot spots when all equipment is disconnected, avoiding inefficient backstage power consumption。
When cell phone signals are low, try to keep hot for as long as possible
Cell phones themselves have weak cellular signals, hand opportunities automatically increase the signal launch power to maintain the network, and when hot spots are opened, electricity consumption and heat are multiplied. If the number of cells in the location is low, priority is given to changing the position and the hotspot function is used。
3. Small heat dispersion techniques
It is clear that hotphones are hot, and it is recommended to remove heavy cell phone casings and place them on rigid ventilated surfaces, not on blankets, couch cushions, which accumulate heat and are not conducive to heat dispersion. The temperature is too high, the mobile phone system is active in lowering performance and the hotspots are slow and disconnected。
Four, try not to fill it up for a long time
The charge itself heats up the heat point with a high load heat, and the body temperature rises rapidly, not only to experience a poor, long-term high temperature, but also to accelerate battery ageing. The network is shared over a long period of time, with priority given to charging the general slot。
V. Flow control to avoid unwitting excess charges
The hot spots share the flow and consume all the food flows from the mobile phone. Computer systems are updated, software backstages are downloaded automatically, and traffic is consumed at a much faster rate than mobile phones, and many have stepped on over-flow pits。
1. Open the mobile phone system to self-carry traffic management and set traffic warning and traffic limits. Reaching the threshold gives a reminder to prevent traffic overcharging。
2. When computers connect mobile phone hotspots, windows systems can manually mark connections as traffic-based connections. Upon start-up, the system will suspend automatic back-office upgrades, download large files and significantly reduce back-office skimming traffic. A lot of people don't know that a few g-flows are gone when computers are hot。
3. When no bandwidth is required, the computer shuts down the video software and suspends automatic synchronization of the disk, reducing unnecessary traffic consumption。
Vi. Common failure screening at hot spots, which can be repaired by steps
Day-to-day use is undetected, unconnected, unconnected, frequently disconnected, without the need to restart the cell phone, and sequenced:
1. No hot spots for equipment
Check if the name of the hotspot contains a special symbol in chinese and replace it with an english numeric number; anjo cell phone switch to 2. 4 ghz; confirm that the hotspot switch is functioning。
Enter code correct, but no access to hot spots
Check if the hotspot is connected to the device and has reached the maximum connection limit; forget the network and re-search the password; turn on the hotspot mobile phone to move the cellular data once。
Three. Hot spots, but no internet
Confirm that the mobile phone is regularly accessible; confirm that it does not reach the maximum speed of the food package; and close the personal hotspot once, waiting for 10 seconds to reopen。
4. Frequent automatic breakup of hot spots
Confirms that cell phones that turn on hot spots do not turn on super-saving models, which force the back-office sharing network to be cut off; opens the automatic closure of hotspots to confirm that they are not automatically closed over time; and improve cellular signals to avoid high temperatures。
Little point of knowledge: some mobile phone packages have separate rules for individual hotspot share flows, and if the hotspot is opened without a network at all, the operator can be consulted to confirm whether the package supports hotspot sharing。
Vii. Cold door usage and misapplication of mobile phones
One, three modes of sharing, selected as needed
In addition to wlan hot spots, mobile phones provide usb network sharing and bluetooth network sharing。
- usb sharing: data lines are directly connected to computers, without wifi radiation, with lower electricity consumption and a stable internet speed, suitable for computer cable access。
- bluetooth sharing: the internet is slow, suitable for emergency text browsing, inappropriate for viewing video downloads and not recommended for daily use。
2. Common error zones
Miss one: the more mobile phones work, the faster the hotspot net。
The maximum speed of the hotspot network, the core of which depends on the current cellular signal of the mobile phone, as well as the speed of the menu, and the performance of the mobile phone itself, which affects only the motor stability. The signal's bad, the flagship phone's hot。
Mistake two: hotspots can operate 24 hours a day for a long period。
Cell phones are not professional routers, and hardware is not designed to be continuously shared around the clock. High-load run flows over several consecutive hours continue to accumulate, speeds are reduced, connections are broken and intermittent use is recommended。
Zero three: turning on the 5ghz frequency hotspot will make the net fast。
5ghz is only the specification of wifi's internal transmission, and the overall speed of the network will remain limited if the mobile phone itself moves to the 5ghz hotspot if the signal is poor。
3. Old phone maintenance alert
After the old cell phone batteries age, the heat load is turned on up, and there will be a loss of power speed. Old equipment minimizes long-term hotspot work and avoids accelerated battery wear and tear at high temperatures。
Interactive topics
Do you always use your cell phones to get out? Have you ever experienced hot spots, cartons, any traffic? The comment section is welcome to talk about your use experience。
