Yakoh, eight-year-old engine pimps
Hey, you guys! We're here today to talk about the rigging of the engine。
It's a pimp installation
Let's start with the importance of this pimping. It's like putting on a "protective coat" for our engine, and if it's not in place, it's not cool。
Let's take a look at those lessons on the internet, what's on the tremors, what's on the tremors, what's on the e-cars, what's on the doors. For example, the wheel-speed sensor, if it's broken or dirty, it's not safe. And the turret, if it's damaged or dirty, it's gonna have to be handled properly to put on a pimp。
You can't do anything with the installation
Step one, steady the car. Don't shake your hands. The pimp's off. The brakes and the brake plates are then checked to see if they are badly worn, and if they are so badly worn, they must be replaced quickly, otherwise the leather strips will not remain intact. You have to see the brake oil. If it's not enough, you have to fill it up. And the brakes, if there were any oil leaks, would have to be fixed quickly。
The second step is to begin the formal installation of pimps. It's got to be careful. Put the leather on it slowly, don't break it or change it. When you're done, check if the pimps are secure and there are no loose spots。
It's installed. Try it
We'll start the car when the pimps are installed. Let's see if the engine's working properly. If it's all right, then we're done with this pimp
