4) when the wifi client is successfully connected, see the following:
3. The wifi ap hotspot model was then developed。
1) a wifi ap access point mode can be added by clicking on the add button in wifi channel mode above。
2) click " interface configuration " - - " basic settings " - " essid " to change the current wifi name (defaultly openwrt, supports chinese, up to 10 chinese characters)
3) clicking on " wireless security" allows for wifi encryption settings (the default is not encrypted no encryption), or encryption options can be selected for wpa-psk/wpa2-psk mixed mode combination encryption, with a key of at least eight digits, other settings only by default, and finally click on save application。
4) wifi ap access point mode set up successfully (default ap lan local area segment 192. 168. 100. 0/24) as follows:
