The [technology of growing lily] is uploaded and shared by [knowledge changed destiny], with a total of [4] pages, which can be read free of charge online, and which requires more information about [technology of growing lily], using a web-based site search function, and choosing the appropriate document for yourself. The following text is to intercept parts of the article, and if you need to get a complete electronic version, download this document to your device to facilitate your editing and printing. The technology of planting lilies
The growth habits of lily
The lily is a lily-licented plume flower, an environment full of sunlight, and a plant of long sunlight, the length of which affects not only the separation of buds but also the growth and development of flowers. Lily doesn't like hot, cool, wet weather. The asian lilies grow 20-25°c in the east, the musk lilies are 25-28°c and the night temperature is above 14°c. At temperatures above 30°c, the growth and development of lilies is severely affected, dysentery occurs, and flowering rates are clearly reduced
Less than 10 ~c grows near retardation。
Ii. Liquar requirement for the land
The lily requires that the soil be ferocious, deep and lax, and that it be able to maintain the fine sandy soil suitable for wetting and draining。
Lithopaic microacid soils with suitable soil phd values of 6-7 in asia and musk; lily is generally resistant to salt and fluorine in soil
The chlorine content is below 50 mg/l。
Preparation for planting
Soil sterilisation: soil sterilisation prior to planting lily is common in both vapour and chemical sterilisation methods. Vapour disinfection, which is highly energy-intensive and difficult to operate, is currently rarely used. Chemical disinfection is the application of 40 per cent of the ff to 1:50 or 1:100 times the pharmacological fluid to the soil, which is then covered with plastic film
5-7 days, 10-15 days to open up and plant, or with polybacteria pink
8-10g/m2
Vaccination in soil。
2. Unfrozen and disinfection of balls: the ball will be unpacked as soon as it arrives
10-15°c
Unfrozen in the environment, to be disinfected after complete defrozen. Decontamination method: leaching of a ball in a water solution such as one in a thousand grams of gramlidanes, bacillus, polygills, potassium permanganate
30 minutes, able to immerse the seed in 80 times 40% of the ff solution, then flush the remaining solution on the ball with fresh water and then hang it in the cold
It's not gonna work. The existence of domestic planting sites, which cut off the original foundational roots before planting, is useful in promoting new foundational roots。
3. Storage of balls: if the thawing seed ball is not ready to plant immediately, it cannot freeze any more, or there is a risk of a freeze that can be deposited at 0-2°c, but only for a maximum of two weeks; it can also be deposited in a 2-5°c environment for up to one week, with plastic sheeting to be removed。
Iv. Depth and density of planting
In spring and summer, planting depths require 8-lofcm at the top of the mantle and 6-8 cm in winter. Cultivation varies according to variety, size and seasonal factors。
In the springs and summers, it is more dense and the winter sun is weaker。
A list of planting densities (expressed in terms of the number of entropys per square metre) of different species, with different specifications, is provided below for your information:
Post-plant management
Temperature: the temperature control of greenhouses is very high in order to obtain quality lilies
Yes. Soil temperatures must remain low at 9-13°c within 3-4 weeks of planting to promote life
Root. If you're too low, you don't need an extended limit, and if you're above 15°c, you're guided
The root of the penis is stunted. These roots will soon replace the base root to provide 90% of the water and nutrition for the plant
Focus. The ambient temperature of the eastern lily should be kept at 15-25°c after the rooting period and that of asian lily and musk lily at 14-23°c. If the temperature is too high
Temperature should be reduced by ventilation and shades; if night temperature is 15-25°c, the lilies will be short, small and of low quality, and at which point (in-country) a strain will be sprayed with cactin solutions to add flowers
The method for the length of the tubing, the detailed use of which varies depending on the length of life, the temperature of the environment, and generally less growth and more later. The temperature of the solar greenhouses in the country, which extends widely to lilies for long periods of time and seriously affects the quality of cut flowers, should be added to the means of temperature regulation。
2. Humidity: soil moisture before planting is good for holding tight and landing. In high-temperature seasons, cold water should be poured once, if necessary, before planting. After planting, water is poured over once more, the soil and the seedlings are fully exposed, creating excellent conditions for the development of root roots. Then water is poured to keep the soil wet, i. E. Hand in hand to hold the earth
It's good to be organized without water. Water is usually chosen in the morning of the sunday. Relative humidity is appropriate for 80-85 per cent and should prevent excessive invertation, otherwise leaf burning may occur。
Fertilizers: the first stages of lilies are mainly stored in their own scales. Battalion
So we don't have to add weight before planting. After a month, we can see the fertility of the land
Follow some fertilizer. The demand for potassium elements in lily is high and can be combined at n-p2o5-k2o = 14:7:21. 10 kg per acre, every 10-15 days, until three weeks before the flowering. Attention should also be paid to the addition of trace elements such as iron, boron and zinc。
Light: light is an important condition for quality control, and lilies are especially needed for growth
Foot of light. The lack of light can cause the plant to grow badly and cause lilies to fall
The color is lighter and the life of the bottle is shorter. I planted lilies in northern china in the winter because of glass
Or the influence of thermostats such as plastic membranes, about 25 to 30 per cent of sunlight is blocked, so besides
In order to keep the surface clean of glass and plastic membranes, some varieties need to be developed
Lines of light can be filled with incandescent lamps. We should use high-pressure sodium for gardening in a good modern greenhouse
Lights. The production of lilies in the summer also prevents direct sunlight, % and 50% of the eastern lilies。
Carbon dioxide: co2 benefits lily growth and flowering. It's on the morning
8-10, application of carbon dioxide gas pills in unventilated sheds to add carbon dioxide to sheds
The content. Other methods may be used, for example: 20 per cent of the sodium carbonate solution is filled with sodium carbonate at a height of 1 metre per 15-20 metre, followed by a gradual drop of 10 per cent of the sodium rare sulphate solution into the plastic drums 3-4 times, resulting in a resonance of sodium carbonate with sulphuric acid。
60 meters long
(in 98% concentration)。
Collection and storage of lilies
Collection: at least two to three buds will be collected later. Early harvest of impact flowers
Colors, flowers will look pale and some buds will not be open. Late harvests cause difficulties in processing and packaging after harvesting, petals are dirty with pollen and open flowers are released with ethylene, significantly reducing the shelf life of the flowers。
2. Processing: after harvesting, the lower 10 cm leaves are removed, followed by grade and binding。
It's 10 centimeters a grade. The longest and shortest branches should preferably not exceed 5 centimetres and be aligned to the top of the flower。
3. Savings: lilies after binding should immediately be placed in clean, earlier cooled water, in a freezer, preferably at 2-3°c。
The lilies usually last 4-7 months, depending on the variety and planting time, the whole planting process takes about 90-120 days, and many of the people who manage the lilies don't know, let's talk about how to manage the pellets:
The plant lily is usually relatively simple because of its small number and its availability. The lilies grow after the flowers have been cut, and the plants grow yellow. Flowerling can remove the parts of the ground that are dead, without taking out the saps, without watering or fertilization, without a pottery mud in the edge of the balcony, without a direct light, until the next spring
Out of the tub, in the basin. In november and december, lilies were sprung in different weather conditions, and in this case, they were sprung up。
