Share EncyclopediaHome EncyclopediaCategories Switch Channel

Whether the maintenance date on the fire extinguisher is valid or due

2026-05-09 03:071270NameNetworking

The maintenance date on the fire extinguisher was the date on which the test was tested after maintenance. Fire extinguishers are regularly tested for good use, rusty or carded, etc. Of handles, valves, pressure relief valves, etc., and are labelled and marked with the date of the overhaul。

Fire extinguisher maintenance period

I. Duration of service and duration of maintenance of fire extinguishers

Time-bound

(1) the duration of the co2 extinguisher is 12 years

(2) the duration of the dry powder extinguisher is 10 years

(3) water-based fire extinguishers are valid for a period of six years。

Duration of maintenance

(1) water-based fire extinguishers shall be released from the plant for a period of three years and shall be repaired every year after the first repair

(2) carbon dioxide, dry powder extinguishers, five years after their release from the plant, shall be repaired every two years after the initial repair。

2. What is the validity of the fire extinguisher

1. See if there is serious corrosive appearance etc.

See if insurance sales, lead seals are in place and, if not, are invalid

3. Looking at the pressure table (with the exception of carbon dioxide extinguishers, the rest of the fire extinguishers have a pressure table), the pressure table pointer indicates a valid qualification in the green zone, the yellow zone indicates too much pressure and the red means that the pressure is insufficient or ineffective。

4. Newly acquired, refilled after five years and once used or filled every two years

The general dry powder extinguisher should be scrapped for 10 years after leaving the plant and can no longer be fully used。

6. After each filling, the maintenance label is marked with the maintenance date。

Iii. What is the period of effectiveness of the fire extinguisher

The fire extinguisher has a pressure sheet, and the pointer is in the middle

2. Do not exceed the yellow zone, the pointer indicates normality in the green zone, the red zone shows insufficient pressure, needs pressure at the fire maintenance unit, and the yellow zone means pressure is full, but beyond normal range, but beyond the yellow zone does not affect at all, so don ' t put it in high temperatures。

Like 0
Report
Favorite 0
Tip 0
Comment 0
Share 1
MoreRelated Comments
No comments yet, be the first to comment
"no detail, no danger." this is the seat of a 30-year-old pilot. References
"look at the eagle as the second life."Zhang dong-yeonEarly winter, cold wind. Early in the morning, the sky was covered and a mechanical technician from the northern war zone, zhuong lin, was dressed up and headed towards the apron. Upon completion of the tools, he proceeded to the work ladder and began the installation and re-examination of the warplane propellers。At temperatures ranging from -10c, the hands of the zenhong forest were fr

0评论2026-08-02114