Approach and attention to the removal of vehicle lights in the great wall
For the owners of the vehicles in the great wall, the lights were activated to remind the vehicles of the need for maintenance. Upon completion of maintenance, the timely removal of maintenance lamps will provide you with a clearer picture of the maintenance period and state of the vehicle. The following is a detailed description of the removal steps and associated attentions for the great wall vehicle maintenance lights。
First of all, let's find out about the common steps to remove the lights:
Insert the car key and do not turn。
2. Press the mileage to zero button on the dashboard。
Turn the vehicle key to “on” position (but do not start the engine)。
4. Wait a few seconds until the maintenance light starts blinking。
5. Release the zero-lire button and press it again so that the maintenance light can be removed。
It should be noted that there may be a slight difference in operational details between the long-wall vehicles of different types. The following may vary depending on the type of car:
Some models may need to press other specified buttons, such as two buttons on the dashboard, before pressing the zero zero button。
Other models may require certain time intervals during operation。
In order to give you a clearer picture of the differences in the different models, we have prepared a simple table for you:
Special purpose for car elimination
H6
The operation takes about 10 seconds to zero
Great wall wei pie vv7
Press the menu key on the steering wheel, then the miles to zero
Good cat in the wall
Operation needs to be completed within 5 seconds after the key is inserted
In the process of removing the lamps, the following important concerns have also been raised:
1. Ensure that the vehicle is in a static state of operation and that the hand brakes have been pulled up to ensure safety。
2. Operation in strict compliance with the correct steps, if inappropriately performed, may result in failure to successfully remove the maintenance lamps or other failure signs。
3. If repeated attempts do not remove the lamps, it is recommended that you go to the authorized bus service centre of the great wall, which is handled by specialized technicians using specialized diagnostic equipment。
Upon removal of the maintenance lights, remember that regular maintenance is performed at the time and mileage specified in the vehicle maintenance manual to ensure the performance and safety of the vehicle。
In short, removing the great wall car maintenance lamps, although not a complex operation, requires you to follow the steps carefully and take care of the details and concerns. I hope this will help you。
