Technical brief:
In response to the problem of non-specified mosquito nails that cannot be adapted to existing gas-acting mosquito nails, the patent achieves automatic ungraded regulation by improving the box structure. The innovation is that the cartridges consist of a fixed cartridge, a fixed cartridge and a live cartridge, together with a skateboard, spring and nail delivery panel, so that the cartridges can automatically adjust the height and width of the nails to the length of the mosquito nails, to fit any size, with a simple structure and without manual adjustments。
Keywords: aero-molecular nails, no calibration, automatic adaptation
Patent name: method of manufacture of gas-activated mosquito nails
Technical areas:
This practical new type involves an aerobic nail gun, in particular an aerobic mosquito nail gun。
The so-called aerobic nail gun is a nailing tool that uses a gas source for nailing. Mosquitoes are a relatively thin, untouched category of aerobic nail series used extensively in indoor fit-out, crafts, etc. The mosquito nails have many specifications, ranging between 11 and 22 mm. Existing mosquito nails are 12, 15, 18, 22 mm or 12, 15, 18, 21 mm or 12, 15, 18 mm, etc. A manufacturer with production nails does not focus on the quality of the product or for the sake of saving material, and the fact that the nails for each specification are not standard results in an increase in the number of non-target specifications, and the existing mosquito nails do not apply to the non-target nails. To solve this problem, li uk-kang designed an "aero-animated mosquito nail". Zl 9923589), the use of springs and side-pressed shrapnel allows for the ungraded adjustment of the height and width of the plume. Chinese patents have also published “an improved mosquito nail gun”. Zl 00231083), consisting of a gun body, a gas-filling power unit inside the gun, an operational control mechanism, an executive strike mechanism and a nail box, which includes a plaque, a nailhead, a peg to the right and to the right, a nail covers, a calibration device and a nail box in the back, and which has been improved to adapt to mosquito nails of different lengths. But their structure is complex。
This practical new type of task is to provide an aero-molecular nail gun, which is simple in structure, is automatically unregulated and applies to mosquito nails of any size。
In order to accomplish the above-mentioned tasks, this practical and innovative solution is an aero-molecular nail gun, consisting of a gun body, an air-conditioning device inside the gun, an operational control device, an executive strike body and a nail box, consisting of the head, cartridge, locator handle, rack, end cover, and a pin that is fixed on the gun through the frame, which is characterized by a clip consisting of a fixed lower magazine, a fixed cartridge and a live cartridge, a slide between the lower and fixed cartridges, a slider that moves in conjunction with the skateboard, a spring that holds the skateboard, a nail between the lower fixed and active cartridges, a pin that is in contact with the plate, a spring that is attached to the top of the plate, and a pin that stretches at the front end of the active cartridge and is condensed at the limit of the active one。
This practical novelty is the refinement of the nail box structure in existing technology. As a result of the placement of skateboards between the lower fixed cartridges and the upper fixed cartridges, skateboard seats connected to the skateboards, springs to hold up the skateboard seats, when nails are placed, the mobile cartridge pulls back and pulls back the skateboards, then pulls up a row of mosquito nails on the lower fixed cartridges, pushes forward, pushes the skateboards downwards so that the nails can move steadily forward to the head of the gun under pressure from the pinboards, sides and springs, so that the practical new type of structure, although relatively simple, has been able to solve the problem of using non-parallets。
This practical novelty and its beneficial effects are described below in the context of implementation examples and their accompanying maps。
Figure 1 shows the structure of this implementation example。
Figure 2
Figure 1 a-a profile view。
Figure 3 shows the b-b profile in figure 2。
Chart 1, lower fixed cartridges, 2, upper fixed cartridges, 3, mobile cartridges, 4, skateboard seats, 5, skateboards, 6, springs, 7, nail delivery, 8, tablets, 9, springs, 10, gunheads, 11, gaskets, 12, directional columns, 13, gaskets, 14, pads, 15, hollow drops, 16, brake pullers, 17, brake boards, 18, racks, 19, locator handles, 20, end caps, 21, bars, 22, gun body, 23, operating control bodies。
See
Charts 1-3, an aero-molecular nail gun, consisting of a body of 22, an aerodynamic device located inside the body of 22, an operational control device, an executive striker and a nail box consisting of the head of 10, a cartridge, a locator 19, a leg 18, a cap 20, a clip fixed to the gun 22 through a plate of 18, which is characterized by a magazine consisting of a fixed one below, a fixed two and a live three, a slide between a fixed one and a fixed two, a slide five, a spring four, a spring with a skateboard four, a spring with a slide four, a nail board between a fixed one and an activity round 3, a nail board 7, a spring nine with a wall, a nail seven in contact with a nail seven, a slide round in front of and a card three。
As shown in figure 2 and figure 3, pillar 12 is fixed below fixed clip 1 and within the vertical slide of skateboard 5. As a result, skateboard 5 rises and presses are carried out vertically and are not easy to deviate from。
As shown in figure 2, a gasket is placed at the front end of the 1st fixed cartridge so that the 2nd fixed cartridge and the 1st fixed cartridge can be attached。
As shown in figure 2, the placement of gaskets 13 and 14 on the lower fixed cartridge 1 allows spring 6 to stretch in parallel with the cartridge。
Figure 1 shows that there are fixed brake pullers 16 on mobile cartridge 3 and fixed brake plate 17 on fixed clip 2. This means that the live cartridge 3 will not be pulled back。
As shown in figure 3, at the front end of the active cartridge 3 there is an empty slash for 15 as an elastic slot for plate 7。
As shown in figures 2 and 3, there is a section 21 on the upper one of the fixed magazines。
Right to claim 1. One type of gas-propelled mosquito nail gun, consisting of a gun (22), an aerodynamic device inside the gun (22), an operational control device (23), an enforcement striker and nail box, consisting of the head (10), cartridge, locator (19), frame (18), end cap (20), clips fixed to the gun (22), characterised by the clip from the lower fixed cartridge (1), mounted fixed cartridge (2) and live cartridge (3), a slide board (5) between the lower fixed cartridge (1) and the upper fixed cartridge (2), slide seat (4), springs attached to the skateboard (5), springs attached to the skateboard (4), pins attached to the skateboard (4), pins placed between the bottom fixed cartridge (1) and the activity plate (3), a plate in contact with the nail (7), a spring in the top seat (8), and a slide section (7) stretching at the front end of the card (3) and a card (3) position。
2. An aerosol nail gun, described in accordance with claim 1, is characterized by a guided column (12) fixed below the fixed cartridge (1) and within a slider (5) vertically。
3. An aerosol nail gun, as described in claim 1, is characterized by the placement of a gasket at the front end of a fixed magazine (1) (11)。
4. An aerosol nail gun, described in accordance with claim 1, is characterized by the placement of gaskets (13) and mats (14) on the lower fixed cartridge (1)。
5. One of the pneumatic mosquito nails referred to in claim 1 is characterized by a fixed brake extraction pole (16) on a mobile cartridge (3) and a fixed cartridge (2) fixed brake plate (17)。
6. One of the pneumatic mosquito nails referred to in claim 1 is characterized by an empty beam at the front end of the live cartridge (3) (15)。
7. One of the pneumatic mosquito nails referred to in claim 1 is characterized by a line attached to a fixed cartridge (1) (21)。
The patent summary contains an aero-molecular nail gun, consisting of a gun body, an aerodynamic device located inside the body, an operational control device, an executive striker and a nail box, which includes the head, cartridge, locator handle, rack, end cover, and a pin attached to the gun through the frame, the character of which is that the cartridge consists of a fixed lower cartridge, a fixed cartridge and a live cartridge, a skateboard between the fixed cartridge and the upper one, a skateboard attached to the skateboard, a spring attached to the skateboard, a nail placed between the fixed and active cartridges, a tablet in contact with the pinboard, a spring attached to the upper plate, and a plate stretched to the upper end of the card and a limit of the active cartridge. It is simple in structure, automatically unstructured, and applies mosquito nails of any size。
Document number b25c1/04gk2528581sq022305
Date of application 23 march 2002 priority date 23 march 2002
Inventor lin jung-geun, yang shihua applicant: le chiung city drilling plant
