The building can be viewed as a highly integrated smart building solution to improve household safety and accessibility through competency management and landscape control. The following is a detailed description of the system's core functionality and technology realization logic:
I. System-connected architecture and hardware layers
Software logic layer
The core scenario function is 1
2. Homeowner model
3. The visitors ' prevailing pattern is a dynamic white list technology:
The building can use the reductive output function of the escalator to link to the elevator door barriers to describe the connection fundamentals, using the escalator exterior page controller and the inner elevator control main plate, to achieve a specific escalator operation. The former will enable the elevator to be out of the elevators and down the elevators, while the latter will be able to complete the authorization of visitors in the elevator cars. Landowners use scenes
Off-home scenario: the owner presses the “shower” key, summons the elevator to the floor where it is located, gives priority to the use of the exterior beeper button and avoids interfering with the logic of the elevator. Home scene: the owner opens the unit door by brushing a card, entering a password, scanning a two-dimensional code or identifying a human face, while the elevator is called to the floor where it is located. Once in the elevator, access is activated again by the above-mentioned authentication, which reaches the floor where the owner is located. However, there may be problems with missing signals or wrong authorization by other owners of the cars without direct lighting of the owner's floors by means of an insider authorization。
Visitors call their owners via the visual walkie-talkie system when they are visiting the site. The door of the unit is opened by the owner, depending on the host of the walkway to the elevator ladder to control the output of the floor, which activates the visitor's permissions (open only, without direct lighting of the floor). When visitors reach the elevator hall and press the top-line button, they can only select the floor on which they are activated by the owner, thus reaching the doorway. This enabler function enhances the security and accessibility of the building, providing both security of residence for owners and efficient access for owners and visitors。
Iii. Key technological risk and combat conflict
I'm sorry
Consistency of the system
4. The extended function recommends that, when an emergency escape fire alert is triggered, the ladder automatically release all floors of access and synchronized the radio system with the evacuation guide voice. Optimizing energy consumption strategy
Based on machine learning analysis of user travel patterns (e. G., concentration of early peaks downstairs), pre-deployed elevators to high frequency floors. Transport management platform
Visualized monitoring of elevator operation (e. G., switch volume signal wave-form maps) and real-time diagnosis of hardware malfunctions such as ageing of relay contacts。
Emc tests of relay control lines (befitting the gb/t 17626) are required to deploy the emc test to prevent error of movement due to interference by elevator transformers. Physicophysical protection level
Exterior call controllers are required to meet ip65 protection levels (dustproof and waterproof) and adapt to high-humid environments such as underground garages. Regulatory compliance
Joint design should conform to the engineering design guidelines for the video security control system (gb 50395-2007) and elevator safety technical specifications (tsg t7001)。
By in-depth integration of security and vertical transport resources, the linkage system not only achieves intelligent management of people's mobility, but also provides quantifiable management value (e. G. A reduction of more than 30 per cent in manual inspection costs). It is recommended that an isp with cnas certification be selected for deployment, and that equipment suppliers select a 10-year-old plant such as doo to ensure system reliability throughout its life cycle。
The building has visualization of the interfacing system with the elevator control technology
Double model signal transfer structure
Three-tier control system
Ii. Typical scenario interactive process
Homeowner leaving scene
Homecoming scene for the owner
Visitors visit scenes
Iii. Security enhancements design
Anti-replicate attack
Elevator behavior monitoring
Fire priority
Iv. Extension of application and transport implications
Special scene configuration
Smart travel
V. A typical hardware configuration installation feature protocol conversion panel (daic-dt-rs485) for the elevator room/weak well rs485 signal conversion and separation floor signal acquisition panel (daic-dt-cj) for each eight floor of the weak electrical switch centralized processing elevator signal transferer (daic-dt-qk) elevator control ladder control command provides a complete access control solution for building the smart community by balancing the security and accessibility of the complex with the daic-dt-rl dynamic human face detection and characterization system through a dual validation mechanism。
The building can visualize the connection between the walker system and the elevator door
Building access management is secure and easy by means of integrated identification, communication protocols and smart control techniques, which can be viewed as a link between the walk-through system and elevator door barriers. The following is a description of its main functions:
1. Visitors connection
2. Landowner ladder process
3. Security and emergency response mechanisms
4. Technical realization details
5. Management characteristics
Through precision control of elevator privileges, the connection system effectively limits the free movement of unauthorized persons to and from the floors, while simplifying the process of elevators for owners and visitors for residential, write-in buildings, hotels, etc., and upgrading the building's intelligence and security levels。
The building will be able to visualize the connection of the intercom to the elevator door
Rationale
Visually linked ladder control is achieved primarily by means of the relay output function of the escalator exterior page controller and the internal elevator control main plate. The former will enable the elevator to go up and down and the latter will complete the authorization of visitors in the elevator carriage。
Landowners use scenes
Visitors use scenes
When visitors visit, visitors call the owner via the visual walkie-talkie system. The owner, while opening the unit door, will be able to control the signal to the elevator ladder by viewing the main opportunity in the room. After receiving the signal, the ladder activates the corresponding floor permission in the form of a switch, but does not directly light the floor button. Upon arrival in the elevator hall, the visitor presses the elevator line button, at which point only the floor where the owner can activate his permission will be selected, thus reaching the owner's door。
This enabler function enhances the security and accessibility of the building, facilitating the travel of owners and effectively limiting the range of visitors ' activities and enhancing overall management efficiency and residential experience。
Brief description of the visual conversational system associated with elevator ladder control (also known as visual walker)
• the out-of-the-post and down-the-trails of the elevator by means of an out-of-the-post call controller relay
• the authorization of visitors' elevator cars through internal lift control of the main board relay output
• when the owner leaves the home, the owner can call the elevator to the floor where the owner is located by pressing the “shower” key (preferably the top and bottom of the page, so as to avoid the logic of the elevator itself)
• when the owner returns home and opens the unit door (cipher, 2-d code, face recognition) and calls the elevator directly to the floor where it is located, enters the elevator brush card (cipher, 2-d code, face recognition) and is successfully certified, the elevator activates user privileges and reaches the owner's own floor, although it is possible to provide a licence not to go through the car to light the floor directly, but there is a problem with the signal being used or the owner being authorized to do so
• guests visit, visitors call the owner, who opens the unit door while viewing the signal of the host output floor in the room to be controlled by the elevator ladder, the elevator control switch activates user privileges (only open access is not directly lit), and when the visitor goes to the elevator hall and presses the elevator line button, he or she selects the floor where the owner activates and reaches the doorway。
