Introduction: with regard to the iphone switch-of-screen knowledge, smartphones are better understood, and the biggest feature of smartphones is that they are big, which also has great benefits and disadvantages. To put it bluntly, today, many of our classmates are used to cell phones in their beds, often asleep, and they don't know where to go, and sometimes they break their screens, and then tell you how to change the iphone5 screen。
I. Dismantling
The iphone5s screen (business labeled original) is usually purchased online at a price of $300, and the purchase of the screens presents an iphone5s dismantling tool。
The iphone5s screens and machine-dismantling tools have been prepared, followed by a change of screens (the change of screens is risky, a friend with poor hands-on skills, please do not uninspect the switch so as not to damage the iphone5s phone)。
1. Before dismantling the machine, the iphone5s were first shut down and the sim cards and slots inside iphone5s were removed using a pin;
Two, iphone5s continues to use apples from their own unique pentalobular screws, which can't be broken with a common screwdriver, and needs apple-specific tools, which are given when buying iphone5s screens. And then we're going to remove the fixed screws at the bottom。
When we're done with the iphone5s fixed screws, we can start to dismantle them from the screen. The process is the same as the iphone5 and we need to use a suction cup to separate the front panel of the screen。
The iphone5s job is very solid, it is not enough to suck a cup alone, and it needs to be ploughed gently and be careful not to push too hard。
5 it is important to note that when iphone5s screens are separated from the body, care must be taken, because iphone5s has a line attached to the touch id sensor in home key and the lightning lightning interface, which can be broken once the separation screen is too strong。
This line inside the iphone5s can easily be dismantled。
Seven, and then we're going to do the iphone5s screen break. This is preceded by the disconnection of cameras, digital converters, liquid crystal screen lines, etc。
Change of screen
1. When the screen is installed, it is mainly a screen installation that requires attention to a number of minor problems. The iron line cannot be folded at the intersection of the screen, and the thumbs keep holding on to the iron, so that the right finger is lightly pressed against the sian。
2. When the line is closed, the left thumb continues to hold the line sticker, and the sound is the button。
3. When a new screen line is installed, the thumb continues to hold the lined iron, and the second line is closed with a sound。
4. Determines that two lined buttons will be activated to test the lower screen and, while the screen is tested, the thumb will continue to apply a light pressured line button。
Five, you need to be careful about the position. The thumb is still holding the line and the angle of the screen and fuselage is not below 45 degrees. The final test screen displays are normal and operational, so that it can be shut down and then a fixed screw can be installed, so that the iphone5s switch screen is complete。
The process of changing the iphone5s is described in detail above, and it is believed that there is a corresponding understanding of the steps taken by iphone5s. It is hoped that this introduction will help you. I'm still a less capable friend of that. Please don't change your own screens. When you change your screens, what you don't meet is not to decide to damage your phone。
