Document description: the overall construction of the forklift and the driving force of the work engine are fully utilized. The bridge was then turned. The gearing device is in front of the driver and the gearing rods, such as the speed rod, are placed on the right side of the driver's seat. The shift is a system used to make the forklift move in the direction determined by the pilot's wishes, and the forklift shift is divided into mechanical and power shifts, depending on the energy required for the shift. (a) the former shift from the driver's body to energy, consisting of a shifter, a mover and a manipulator; the latter is a shift device that uses both the driver's body and engine power for energy switching. Under normal conditions, forklifts turn to the required energy, with only a small portion being provided by the driver, most of them by the engine. Overturn force multipliers provided. However, in the event of the failure of the retro-energizing device, the driver should generally be able to carry out the transition independently. Forklifts operate with a shift in mobility and, in order to reduce the driver's manoeuvring burden, the internal forklifts use more power switching devices. The most commonly used power transfer units have a total power shifter, a semi-whole power shifter and three transformers. The brake system is a system for slowing or parking forklifts. It consists of brakes and brakes. The brake system can be divided into three types of brake system, manual brake system and server brake system. The former uses the driver's body energy as a brake energy; middlers rely entirely on the power transformation of engines in the form of pressure or hydraulic pressure, which is the combination of the former and the middle. The composition of the forklift chassis and the other components are similar to that of the car, their functions and working principles, so that nothing in that part is more detailed than the car. In the balanced heavy forklift, there's a balance in the back of the forklift to balance the fork. The quality of the goods in the front of the vehicle, the power unit (internal combustion engine) of the forklift, or the batteries, are generally installed in the back of the forklift to provide a partial balance. It consists of the following five parts: (1) the recovery tool. It is a variety of work tools, represented by forklifts, which are used to retrieve, trap and shovel goods. (2) a crane. It is used to install forklifts or other work tools and tow the goods together. (3) doors. It is the skeleton of a working device, most of which is installed on the door frame. Two-sect doorframes by the outer shelf and the inner door that can rise and fall along the outer shelf
