Most of the failures encountered in the maintenance of televisions are broken screens, broken screens, broken backlights, broken main plate, and relatively few of the software problems, such as open cards, logo, re-starts, cartons, unconnected, slow internet access, etc. Because the tv and the cell phone are the androids, they're done。
A 55-inch television was repaired at the door today, and the failure was the normal switch, the normal ads were broadcast after the turn-off, only the desktop was out of hand, the remote was out of service and there was no way to watch the tv。
The client himself began to think the remote was broken and bought another original remote, but it was still not working。
Before going, detailed communication was made with the client, which determined that the failure was due to the fact that the television was full of hard disks and there was no cache space, so it was stuck and could not proceed with the next operation。
So i've got the mouse, the remote's not working, and the mouse should be working. It's easier. It should be clear to the scene that the television model, with a laptop and a flash drive, is the most convenient and time-efficient。
When you go to the client's house, turn on the television, as the client describes, the dozens of seconds of ads are perfectly normal and there are sound and images, but when you enter the desktop, the hint space is gone and it needs to be cleaned up immediately. But pressing the key on the remote control is non-responsive and the remote control is not working at this time. However, pressing the switch on the remote control can be disabled。
It also appears from the tip that the tv is really out of hard drive space and that the cache is running out, so it's stuck. The remote control of the television is infrared and there are red light flashes for camera observation of the trigger。
The method of matching the remote control is simple, so it is only necessary to hold the screen and the key at the same time, close to 50 centimetres of the television, and it works in seconds. I wonder why you still need a match when you're an infrared remote? It was only then that it became clear that the remote control was infra-blue teeth and that the television was operated through the bluetooth remote control, so that it had to be paired in order to function properly。
I pressed the shaker behind the tv, immediately processed the buttons away, the tv went into management mode and started cleaning up the garbage, but nothing changed. As can also be seen from this window, the 4g hard drive on the television has run out of 0. 03m。
It is now certain that the television is out of cache space, so it is not working properly. Just unload the software or restore the plant settings。
Because the remote cannot be operated, you have to use the key. Because it's a roller pole, it's not like multiple buttons, and when it's turned on, you can see little robots。
I've also looked online at how hale's tv is reset, the remote is not working, the key is not home, so several of the methods that are said on the internet are not feasible。
When i looked at it, i found that when i went into tv mode or hdmi, i could hit the roller button on the tv, and then reset the system in the setup。
It's easier to operate because of the mouse, and it takes about three minutes for the tv to go back to the setup when it's mandatory。
There is also a problem here with the wifi password, which is available online on a mobile phone, the television, and not more than 15-bit tips, which is the first time i have met a smart device too long。
And a short password that the client has set for itself, lost four or five times, all of which are clues that cannot be connected, is stuck here。
Because only old people are at home. Ask them all the time。
I can only turn on the hot spots of my cell phone and connect the television to my cell phone so that when i get to the desktop, it can be played. When the tv went on, i called out the system menu and connected to the client's wireless network in the wifi again
Summary:
One, the tv keeps the physical buttons, they're easy to repair. What if the simple osd menus don't work out and the remotes don't work
2. In the event of encountering the television carton, the fastest way to deal with it is to use the disk directly for the brush, based on the television model and sticker parameters, although it takes 10 minutes。
