Since we have purchased air conditioners, sometimes they need to be moved to other locations or for other reasons, they need to be dismantled, but they require specialized skills, so today, when the make-up comes to give you a presentation on the need to take out air conditioning, there are some things that we hope will help you understand。
Air conditioning
1. To see whether the interior wall of the room with the air conditioner has any other effects, such as falling, and to ensure that the indoor air position is equipped with a radiative effect and a favourable factor in the security of the wall。
2. Air conditioning installation should not be too low. Some families place air conditioners on windowsills, which is not conducive to reducing the opening rate. Because “cools down, heats up”, the lower indoor air is the cold-hot mixed air. The upper layer of the room is higher-temperature air, which, if installed on the window table, produces low-temperature air, which is relatively inoperable, and which is not effectively cooled. Therefore, air conditioners should be installed in suitable positions in the backlight room. In particular, air conditioners should not be placed too close to the outdoors so that they can easily resonate and cause noise。
3. Air-conditioning temperatures are not appropriate to be too low and are generally controlled between 24 and 28 degrees or higher, as long as people do not feel the heat. The temperature differentials are high and people can easily feel uncomfortable, while electricity consumption is multiplied。
4. The installation process must be careful not to blindly follow the advice of the installation staff and change the external environment by, for example, not removing the stationary outside iron bars because of the size of the air conditioner, which not only undermines the beauty of the small area, but also makes it easier to steal
5. Do not randomly alter the direction of the indoor power lines and increase the power load, which can easily cause air-conditioning fires, resulting in a series of property losses. Finally, users are reminded that more attention should be paid to safe use of electricity。
Air conditioning
1. Turns on the air conditioner cooler and the temperature down to the lowest temperature (in order to prevent the air conditioner temperature from reaching work) in the winter room, if the temperature cannot be cooled, covers the temperature sensor with a hot towel, waiting for 5 to 10 minutes, and turns off the high pressure valve after all normal operation of the compressor by opening the protective cap on the gas tube interface with a hard wrench and closing the high pressure valve (light) clockwise with a six-angle of five。
2. Air-conditioning exterior: unloading of outdoor machines requires two people. First, one end of the nylon rope will be used to tie the outer room to the centre, while the other end will be firmly located on the balcony. When the outsider connects to the high-voltage tube locker, the threading of the link to the outsider is secured by a pre-positioned sealed tape, and the second seal is fitted. The control line is unloaded from the outdoor machine with a modified cone to determine the location of the wire. A fixed swelling bolt is then removed, the best way being for one person to lift the outside engine, and another person to wrench the screws of the frame together。
3. Air-conditioning interior breakers: connect the interior with two wrenchers to the locks of the locks and then rotate the locks with their hands and unload the lines of control with a modified cone. The single-cooled air conditioner control line has two power lines and one protected ground line. The switchboard is marked a, b, i, 2. The cold-heated air conditioner control line and power supply are above five lines. If the end plate is not marked and the control line is seconded, it is advisable to cut the control signal line at the end of the end of the endboard with a plier or to use a note to follow the subboard line; so that the signal line is not correctly connected at the time of installation, causing the outdoor machine not to function or the outdoor machine not to function。
These are some of the attentions that have been given to dismantling air conditioners, and it is hoped that they will be taken into account when we buy air conditioners for their use in the future, and that they will certainly provide us with some good help, but it is best to invite professional staff for the best use。
