How do you set up the sky-wing broadband offline router

Content navigator: i. How do you set a circuit-wireless router outside the router

Lines are attached to the off-line router setting method: set a secondary route。

I. Two routers connecting methods

Cats: 1wan cat-routers; 1lan routers - 2wan routers; 2lan routers - computers。

No cats: 1wan web-line router; 1lan-liner 2wan router; 2lan-computer router。

Ii. Application

Before setting up, please disconnect this router 2wan line and plug it in when the setting is complete。

1. Set up the 2nd router ip segment。

1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 。

For example: 192. 168. 2. 1

At the restart of the router, the address of the router is 192. 168. 2. 1。

2. Set up a second router access method。

View ip details of computers connected under router 1。

(win+r-input, cmd-input:ipco)/fig /all

Remember: ip, mask, gateway, dns

2. Set on the 2nd router, select [setting wizard] [static p]。

Enter the ip, the other。

Mask, gateway, dns set the same。

3. Restart the router when set。

Ii. How to set an outer router for sky-wing broadband

Both telecommunications and mobile settings are the same。

The detailed steps are as follows:

1. First, the power of the wireless router is plugged in, then the network is plugged into the router and placed at the wan gate, then the router and the computer are connected together with a web line, which is plugged into the lan gate。

Once it's finished, enter the address shown on the router on the browser, usually 192. 168. 1. 1.

There's a place that needs account numbers and codes, usually admin.

After login, the router page is entered, where all the settings can be set, with the first click on the settings wizard。

4. The internet should be set up in three options, and if your line is dial-up, choose pppe。

5. The pppoe settings are selected with the internet account number and password, ok。

Iii. TplHow do you set an offline router

Set up a broadband with a line-by-wielding to tp-lInk wireless access method: routerb for switchmaking。

Note: router a = has router; router b = no router。

1. Router a normal setting。

2. Router b settings:

1. First, we have to empty the wan and all the connections are connected to the lan。

2. Closure of dhcp service at route b。