There are a variety of ways to keep the light to zero。
One is to shut down the engine, press the right button on the dashboard, press the button with the left hand and open the ignition switch with the right hand, and release the button when the dashboard shows the entry into the double mode, and confirm the replacement by pressing the left menu button in 20 seconds。
There is also a common operation to turn off the vehicle, press the "0. 0 " button on the dashboard in the vehicle, keep its left hand open, turn on the ignition switch in the right hand, release the switch when text information is displayed on the dashboard screen in the vehicle, and then press the " 0. 0 " switch gently to determine the information and to make it clean。
For a roller car with a 1. 6-litre cde and 2. 0-liter cen engine, after closing the ignition switch, press a button next to the speed sheet, open the ignition switch, when the dashboard displays a flashing wrench signal for the unit, relaxes the button next to the speed table and then turns to the button next to the speed sheet for the right, the maintenance period monitor is reset。
The type of vehicle equipped with a 1. 4-litre cfb engine will first close the ignition switch, press the button next to the speed sheet, open the ignition switch, so that the dashboard displays a flashing wrench signal for the unit, loose the button next to the speed sheet, and then press the button next to the turn schedule, and the maintenance period monitor will be reset。
In addition, two buttons can be found below the dashboard, on the right hand, to maintain the double button, to activate the mass run, to allow the maintenance cycle indicator to enter the double mode, to release the right button, and to remove it by pressing the left button of the popular flasher dashboard。
You can also turn the steering wheel shortcut right into the maintenance interface and hold down 10 seconds to clear。
It needs to be noted that certain models cannot be manually completed to zero maintenance lights and must be coded with a dedicated computer。
A mastery of these loose maintenance lamps to zero can easily ensure that the vehicle is correctly maintained。
