We've been curious about the internal structure of the p7 machine, which came a little late. With this curiosity, today the author will find out what the total dismantling of china to p7 is. From the dismantling, the interior structure of the chinese p7 is similar to the glory of the previous one, which is not very complex, but very sophisticated. The tightness of the card and the tight structure, as well as the very high level of protection in some detail, are very much in line with the level of china's international brand of the world's top 500。
China uses a non-dismantling battery design for p7 and therefore needs to blow the glue from the back of the shell with an electric blowout and slowly pull it out with a suction。
It's very strong, and it's taking a lot of effort
In addition to the graphite used to help diffuse heat, the back-hull camera is located in a protective circle that prevents ash from entering, but also has some waterproof effect, which is still very delicate。
There are many shields on the main plate of the chinese p7 and a lot of screws, which are divided into two specifications, with black and white errors。
It's a silver and white screw, which actually feels like a craftsman。
This is the line for the chinese p-7, which needs to be opened when dismantling the main board。
Once all the screws are pulled out, the line is opened, the main plate will be squeezed, similar to glory six, but different in detail and visible later。
This is an earphone interface and a vibration unit, which is also visible in the radio frequency antenna, so that there is no need to break it down。
It's a speaker for the chinese p-7. It's a good soundwork。
Lithium polymer batteries, with a capacity of 2530 mn, are glued and need to be blown with a heat blower, and there is nothing to see, and they are not unopened。
This line is a radio frequency connection that needs to be lifted light when the main plate is removed。
These two cameras are small and large, 13 million pixels behind and 8 million pixels ahead of them. As you can see from previous cameras, this is a secondary processing done by sunny, which does not make cameras, but only for mobile phones, so it's actually sony's camera。
The main plate, all of which was opened, was naked like a naked girl and then looked at the big picture。
This side of the main panel can see the sim and sd slots, with the processor and running memory on the right。
So this is the 1. 8 ghz main heathrium 910t four core chip and the 2gb memory of hercules。
It's a 16gb fuselage. It's from toshiba。
The metal frame for the chinese p7 is much better than that of 304 a metre. It works very well and grinds very thinly。
This is the end of the whole family of the parts
