This practical novelty is in the field of mushroom culturerware technology, specifically involving a fung culture bottle。
Background technology:
2. The mushrooms, also known as scissors, tails and eggs, are zhegaka, a multi-year grass plant. There have been wild mushrooms, i. E., mushrooms, with bitterness and mushrooms, commonly known as vegetables and eggs, in the county where even the city has been growing for over a hundred years. The country's origins are distributed throughout the north and the south, with more cultivation in the south, and before and after the light, the sprouts of saplings are removed, the berths are circled or placed in baskets, wet straws are covered and water is sprayed while dry. Existing mushrooms are cultured in bulk bottles, placed on shelves, are managed in a uniform manner, and existing incubators are unable to regulate space size and air vent size and meet the growth needs of mushrooms。
Technical realization elements:
3. This practical and innovative solution to the technical problem: existing incubators cannot regulate space size and vent size to meet the growth needs of mushrooms。
4. Technical programmes: in order to address the above-mentioned technical problems, this practical and innovative technology option is as follows:
5. A fungus group culture bottle, including a body, top and bottom cover, with open openings set for the bottle; both the top and bottom caps are connected to the bottle; the top caps include the tube and the regulator covers; there are a number of air vents around the barrel, with an open opening set for the upper and lower end, with a connection to the bottle, a filter layer in the inner wall of the tube, a holster holster inside the regulator covers, a number of air vents at the upper end, a filter layer at the upper end of the control cover, a rotor covers on the top of the control cap, and a rotor covers that can be rotated around the hood; and a convecular vent three on the rotor cap that corresponds to the air vent。
6. Further, there is an insulation layer within the said basement; the insulation layer is an empty plastic layer。
7. Further, the centre of the rotation cap in question has a rotor axis, and the centre of the upper end of the corresponding control cap has a trough and the rotor is located inside the axle。
8. Further, the height of the cartridge in question is marked by a number of well-balanced cones, with a groove around the groove and a magnetic bar inside the groove; the inner wall of the corresponding regulator covers a second groove, a second magnetic bar inside the groove, a second groove outside the second groove, and an equal distance between the distance between the second groove and the contour。
9. Further, the cartridges in question are connected to the bottle screw or to the buttons。
10. Further, the said caps are connected to the bottle screw。
11. Further, the filtration layer in question is non-wielded or filtered film。
12. Further, the bottles in question contain flexible condoms; the said flexible condoms are rubber or plastics. Useful effects: this practical novel has the following advantages compared to existing technologies:
13. This practical new type of mushroom group culture bottle can be removed from the top and bottom, to facilitate the placement and removal of the mushroom plant strain, and the bottom insulation effectively prevents contact between the fungus and the bottom of the bottle and harm to the fungus by excessive temperatures。
14. The ceiling of this application regulates the number and size of high and permeable vents, thus regulating the spatial size and permeability of incubators, meeting the spatial and permeability requirements of mushrooms in growth processes and making mushrooms grow better。
15. Embezzled vials are equipped with flexible condoms that effectively prevent bottling with shelves and protect culture bottles。
Annex figure description
16. Figure 1 provides a practical and new structure diagram
17. Figure 2 provides a top-covered profile
18. Figure 3 provides a partial magnification figure in figure 2 (a)
19. Figure 4 provides a bottom profile。
Implementation modalities
20. Further elaboration of the invention is given below in the context of specific implementations, which are carried out in the context of the technology programme of the inventions, it being understood that these are used only to describe the invention and not to limit its scope。
21. As shown in figures 1 and 4, a fungus group culture bottle, consisting of 1 vial, 3 cap and 3 cap, and 1 vial opening setting. The cap contains air vents and filters, which act as vents and prevent dust from entering the culture vials; the bottom 3 has an insulation layer, which effectively prevents the contact of mushrooms with the bottom of the bottle and prevents damage to mushrooms by excessive temperatures. Both caps and caps 3 are connected to bottage 1 that can be removed. Thermal insulation 4 is an empty plastic layer with good insulation and low cost, and protection against aroma。
22. In the cultivation of the fungus, with its length of the tubing, limited space for the preparation of bottles and increased demand for oxygen from the long mushrooms, the top covers of the application are shown in figure 1, 2, 3 as follows, including cartridge 21 and condensing cap 22, with a number of vents of 23, upper and lower openings, a connection between the lower end and bottlehead 1, with a filter layer in the inner wall of 21 and a filtration cap of 22, with a number of vents of 22 on the upper end of 22, with a filter layer on the upper end of 22, with a rotor cap of 25 on 22, with a contoon of 25, with a contoon of 26, with a rotor lid of 25, with a rotor rim of 28 on the upper end of 22, with a contoon of 27 on the upper end of 22, with a recordation rim of 28, with a contoon of 27 on the upper end of 22. Rotation caps 25 can rotate the air vents of 22 on the regulators caps to the size of ii24。
23. There are a number of well-balanced cones 211 in the 21st height of the cartridge, a gutter around cam 211 and a magnetic bar 212 in the gutter; the inner wall of the corresponding lid 22 has a second groove, with a second magnetic bar 221 in the gutter, and a second magnetic bar 221 out of the second groove, the distance between the second gutter and the distance between cam 211. The height of the whole culture bottle can be adjusted to meet the growth needs of the fungus by regulating the 22nd condensation of the cam 211 at different heights。
24. The cap is connected to bottle 1 via cylinder 21 which can be a threaded connection or a pin attached connection. Bottom lid 3 is connected to the vial 1 screw。
25. The filtration layers described are non-wielded and have the advantages of damp protection, air penetration, softness, low quality, non-flammation, easy decomposition, non-toxication, colour enrichment, low price and recycleability. Or for the filter film, the filter works better。
26. Bottle body 1 is fitted with flexible suite 5, which is rubber or plastic condom, which effectively prevents bottle body 1 from bumping with the shelf and protects culture bottles。
27. The above is a practical and innovative approach to implementation, and it should be noted that, for general technical staff in this field, a number of improvements and embeddings can be made, which should also be considered as the scope of protection。
Technical characteristics:
1. A fungus culture bottle is characterized by: a cavity (1), cap and cap (3), a cavity (1) opening setting; a cap and cap (3), both of which are connected to the cavity (1), which can be removed; a cap consisting of a cylinder (21) and a lid (22); a cavity (22) with several vents (23) around the tube (21), with an open upper and lower end setting, a connection to the cavity (1), a filtration layer in the inner wall of the cylinder (21), a cylinder (21) fitted with a visceral lid (22), a transceive tector (26) on the upper end of the cavity (22), with a filtering layer on the upper end of the cavity (22), and a contorcort (22), with a revolving lid (25), a rectangular lid (22) and a contangular verture (26). 2. The fungus culture vials, as described in claim 1, are characterized by the presence of an insulated layer within the said bottom (3) and an empty plastic layer. 3. In accordance with claim 1, mushroom group culture bottles are characterized by rotors (27) at the centre of the rotating cap (25), axes (28) at the centre of the upper end of the corresponding regulating cap (22), and rotors (27) in the axle (28). 4. The fungus culture vials, as described in claim 1, are characterised by the fact that the cartridge (21) above has several equilibrated contour (211) in the direction of its height, that there are ditches in the vicinity of the contour (212), and that there are magnetic bars in the gutter (212); and that the inner wall of the corresponding contortion cap (22) has a second gutter, which contains a second magnetic bar (221), that the second magnetic bar (221) is outside the second gutter, and that the distance between the second gutter and the edge of the contour (211). 5. The fungus culture vials, as described in claim 1, are characterised by the fact that the cartridge (21) in question is connected to the cylinder's body (1) screw or to the pin. 6. The shroom group culture bottle, as described in claim 1, is characterized by the connection of the bottom (3) of the said cap to the body (1) screw. 7. In accordance with claim 1, mushroom group culture bottles are characterized by the fact that the filter layer in question is non-swipe or filter film. 8. The distinctive features of the fungus culture bottle described under claim 1 are: the soft condom on the body (1) in question; the soft condom (5) in question is rubber or plastic。
Technical summary
This practical new type of open mushroom group culture bottle belongs to the area of mushroom culture material, including the body, top and bottom caps, which are open-to-open; the top and bottom caps are connected to the bottle; the top covers include the cylinders and the adjustable covers; there are a number of air vents around the cartridges, the upper and lower end openings are set, the lower end is connected to the bottle, the inner wall of the tube is covered with a filter, the tube is fitted with a number of air vents 2 on the upper end of the control caps, and the upper end of the control caps are covered with a filtration lid, which is retorted with a retortible lid; and there are three vents corresponding to the vents. This practical novel provides a calibrated culture bottle of air and space size that meets the spatial and permeable requirements of the fungus culture vials in the growing process to make the fungus grow better. Make mushrooms grow better. Make mushrooms grow better。
Technical researcher: cheng libao, zhao sun, zhao min yong
Protected technology users: yangzhou university
Technology r & d days: 2022. 01. 12
Technical publication day: 2022/6/17
