Air-conditioning compressors play an important role in air conditioning, as much as the heart of a human being. The main function of the ac compressor is to act as a compressor-driven refrigerant and then pass the heat through the radiator. So, if the compressor fails, the air conditioner will not work, so how does the user maintain the air-conditioning compressor in normal life。
Glac compressor
Air-conditioning compressors split evaporation (low pressure area) and condensation (high pressure area) in working circuits. Indoor and outdoor air conditioners are in low or high pressure areas (depending on their working status), respectively. Refrigerants then move from high-pressure areas to low-pressure areas, ejected through a cavity tube into a evaporation unit, where pressure drops sharply, and liquid refrigerants become immediately gaseous and absorb large amounts of heat in the air through dispersions. As a result, air-conditioning compressors continue to work, constantly absorbing heat from one end of the low-pressure zone into the refrigerant and spreading it to the high-pressure zone, thus regulating temperature。
1. Close the inhaler cut-off valve, activate the compressor for a few minutes, discharge the refrigerant from the warp axle box into the condenser and make the warp a vacuum. Stop and immediately close the vent terminal and slowly remove the remaining gas from the high pressure cavity by the perforation of the perforation conch on the side of the vent. The perforated cortex by the spin down inhaler valve is fitted with a cone of teeth and a copper pipe。
2. Prepare lubricant. Fingers were used to hold the pipe and the compressor was activated to pump the air out of the rotors. If a hydraulic shock occurs, the compressor is allowed to operate for two to three minutes, leaving a vacuum in the warp axle box, which stops when the finger of the plume feels a stronger suction. The finger-stamped pipe is immersed in oil, which is then released, and the oil is inhaled from the pipeline arc。
3. Observe the oil surface indicator, and indicate whether the oil surface reaches the oil line. Dismantling copper pipes and connections, spiraling screws, boosting compressors to extract the inhaled air from a curved axle box, and pressing exhaust gas cut-off valve bolts when the vent is not heard. Open the inhaling, exhausting and refuelling。
The operation of gac compressors is complex and plays a significant role in this workflow and absorbs heat from air through refrigerants. Therefore, more attention is paid to the maintenance requirements of compressors, and specialized methods can be used at home to clear gases from the high pressure cavity, as well as lubricating oils on important areas, so that air conditioning compressors can operate smoothly。
