What's the reason for the slow heating of the grinch microwave
1. Functional keys, wrong keys, not actually opening the microwave
(b) time problems, which require insufficient time, and adjustments to the amount of food
3. Low capacity of the microwave itself
4. The microwaves used are malfunctioning
5. The method used is wrong, and if oil-free food is not covered, the heating will be faster
6. High firepower with no default for a computer key set
7. Ageing of magnetic tubes
8. Short circuits between leaking polar transformers。
Two, why does the griss microwave start automatically
1 if a mechanical microwave is used, it should have been the last time that a post-heating knob was used without pointing to a zero-ticket line, bearing in mind that each heating time was completed by pointing the knob at a zero-point line。
2. If not a mechanical microwave, it should be a computer plate string problem, or if the initial key is used to offset death, it is recommended that the link be sold。
Three, the griss microwave panel is out
Reasons and solutions are as follows:
1 the micro-start damage requires replacement of the micro-start
2. Control plates are damaged and require repair
3. User power outlets are not well exposed and need to be replaced
4. The microwave door is disconnected and needs to be replaced
5. The low pressure fuses shall be melted and the fuses shall be replaced
6. High voltage capacitors are damaged and need to be replaced。
Four, why does the griss microwave burn magnetic tubes
The majority of the microwave burners are caused by fires inside the furnace, as follows:
1. Microwave furnaces are operated on board, i. E. Microwave functions are activated without food in their inner cavities, which are strictly prohibited from being launched on board。
2. The vessels used are metal vessels or vessels with gold and silver edges that cannot be used in microwave mode。
3. The cloud masts from the microwave feed and export are fluent, and too much adhesive oil has caused fires。
4. The non-rotation of trans-wave microwave furnaces may also cause fire at the base of the furnace。
