The domestic commercial central air-conditioning centre, a company specializing in branding, type of air-conditioning/central air-conditioning maintenance, design, installation, cleaning maintenance and spare parts replacement services, sincerely invites a wide range of new and old clients to call for advice!
Service flow: appointment service — initial communication (master's initial communication appointment time, electrical brand, model, failure, contact and address) — door-to-door survey — programming — cost determination — contracting — start maintenance — provision of warranty。
Xian city air conditioner maintenance plus fluorine non-refrigeration maintenance fast up the door
The central air-conditioning interior units and pipes need to be hidden inside the ceiling, so the installation of the central air-conditioning unit will have to be finalized and the interior and plumbing installed before it is completed。
Location of outdoors installation
Outdoor aircraft may be installed in a room close to the interior, in a well-ventilated location; the installation shall be made from a compact table, with a solid surface, sufficient carrying capacity and no vibration to reduce the noise generated during the operation, and the outdoors shall be pre-empted on the side of the electrical control to a sufficient size。
Outdoor machines must be sunproof and unshielded, and can be equipped with shades to prevent excessive consumption of the body by the machine's excessive temperatures and natural winds. However, it is not allowed to be closed, not to be installed in closed leave space, and the outdoors are to be surrounded by ventilated and well ventilated。
Location of interior aircraft installation
The interior aircraft may be installed in the ceiling or on the top of a high cabinet, which can be installed in a covert form to accommodate interior fittings, which are generally extremely thin and can be placed at an altitude of about 25 cm or so. The placement of indoor vents should be reasonably selected to ensure a cycle of indoor air formation, with a good cooling effect。
The location of the interior aircraft also varies according to the location and mode of installation of the living room, dining room and bedroom。
The living room, which serves as a reception for guests and friends, is an impression of the state of the home's renovation, with the use of a covert windpipe as a means of carrying back the wind. Care should be taken in places where wind vents are not available to people, such as couches, tea tables, to allow the wind to come out of the side, to improve comfort, and to avoid causing human discomfort by blowing directly into the living room, if the size of the living room so permits。
The dining room is generally adjacent to the kitchen, where the central air conditioner can choose to be installed on the chandelier between the restaurant and the kitchen because of the smoke. Wind vents should be avoided vis-à-vis the table, as air-conditioning vents on the ceiling are more or less adsorbed with dust, and wind vents should be prevented from blowing dust into food, affecting dietary health. The wind vent is kept as far away from the kitchen as possible to avoid inhaling the smoke, which affects air quality。
Bedrooms are used as rest spaces, and the installation of central air conditioning is highly comfortable and aesthetic. Indoor machines can normally be installed on a chandelier above the bedroom door, using a flexible side-to-side wind delivery to harmonize air conditioning and decoration. In terms of location, care needs to be taken not to blow the bed straight to the detriment of health。
As a place of study and work, it is important to choose low-noise indoor windpipes, which suggest that they should not be directed to the desk, that they do not cause books or paper to be blown out directly on the table, and that the hot wind in the air-conditioning heat is prone to overheating。
