Printers have become important helpers in both learning and working. As we all know, with the automation of our offices now, i have facilitated much of our work in life, and we believe that as science and technology develop, we also need to move forward and continue to produce more and better products to apply to our lives. Today's main editor is interested in introducing a wide range of friends to the maintenance and use of eppson's large-scale printer, which is very helpful in working and learning life。
Eppson's mass printer maintenance:
1 the image is incorrect or colourless, and the ink in the printer drive is set to "black": modify the settings to "colour"。
2. Ink dry knots due to the long exposure time of the print head to the air: after printing, ensure immediate return of the print head, cannot place the printing head in the replacement box for too long and should be replaced in a timely manner。
3 when the cartridge drops, it cannot be printed and there is a bubble in the cartridge: the printer's automatic cleaning program is used to clean the head. If repeated cleanings remain unaltered, do not remove the cartridges and wait a few hours for retesting, which may be improved。
4. Prints the image with stripes, white bars or graphics lighten, blurry, and medium settings do not match the type of medium actually used: modify the medium type of the driver to match the actual medium。
Attention to the use of eppson's large-scale printer:
Printers shall be placed in a work environment that is smooth, sensory, tidal, incalculable, corrosive and far from heat sources, seismic sources and the avoidance of direct sunlight. The normal temperature range for needle printers is between 10 and 35 degrees (the temperature changes cause large variations in electrical parameters, with normal humidity ranging from 300 to 80 per cent)。
2. Keep it clean. The dust and paper crumbs in the cleaners are regularly cleaned with small brushes or vacuum cleaners, and the detergent is frequently used in the centre of the suction. Do not use alcohol lamp organic solvents to the extent possible) soaked software to wipe printer casings to ensure good cleaning。
3. Periodically check the printer's mechanical devices to see if they have bolts loose or fall, or if the rail tracks are worn out. The flexibility of the paper structure, the word car and the colour belt conveyor, if any, should be tightened or adjusted separately。
4. Check that the colour-belt protection sheet in front of the header is broken and should be replaced in a timely manner if it is worn or scraped during the printing process。
It can be said that, as science and technology develop, we hope that one day automation can come closer to a step, and we believe that such an idea should come true. Of course, there are still plenty of printers on the market, and the good ones and the bad ones, but of the many printers, eppson's large-scale printers are pretty good. This is an introduction to the maintenance and use of eppson's macroprinters。
