Dual-pulse power sources - overview: pulse power sources, dual-frequency power sources applied to plating, silver, nickel, tin, alloys, can significantly improve the functionality of plating; protective-decorative electroplating (e. G. Decorative gold) can provide uniform, bright and corrosive colours for plating; and within pulse power currents 10a ~ 20000a, voltage 3v ~ 600v, various special specifications can be rapidly customized for different functional applications, as required by the customer. Double-pulse power - characteristics: when pulse power is used for the purity of precious metals, the purity of precious metals is higher. Pulse power is better than traditional plating and is the direction of plating. Double-pulse power sources are more nuanced than single-pulse power plating, and the light is better. The arctic decomposition of the back-pulse of the double-pulse power source has resulted in a rapid recovery of metal ion concentrations in the cathode, which has facilitated the use of high pulsation current density in subsequent cathode cycles, resulting in dense layers, light and low plating; and the back-pulsive diaphragm of the double-pulse power source has led to a significant reduction in the adhesion of organic impurities (light-bearing agents) in the plating layer, resulting in high plating purity and high resistance to variability. Double-pulse power -- the principle of working: the pulse power that we produce is single-swirl and double-swirl, negative-pulse power, digitized control using unique modulation techniques. The width of the positive pulse opening (t+) and the length of the negative pulse opening (t-) can be adjusted during the full cycle. Both positive and negative currents and voltages can be regulated independently. Different needs of clients can be met. Double-pulse power sources - technical parameters: enter a voltage ac380v/ac220v e. G. Constant currents/heat pressure conversion (0~g.) high-frequency (hf), direct-flow and super-heavy-regulated wave-regulated accuracy < 1% eff < 89% < power factor > 90% power factor < protection mode overpressure, underpression, overheated, over-cooled wind or cold water, with an optional configuration of plc interface with an environmental temperature of 20°c-45°c 80% environmental humidity insulation level b protection level ip20 dual-pulsive sources-spectform: model /mm-cool by means of specification mm-g340 x 620v x dc. Output of electrical pressure/dc. V/kg ggd-200a/v400x250 wind, cold 200a12v15 ggdf-500505080ax50x10tx10v12v40a3xtxa3txa3xa3txa3txa4a4a (10a-20000a, voltage 3v-600v), production cycle around one week. Free one-year insurance, life-long maintenance, free training of maintenance staff for clients
