There are friends in the home who have been refurbished and must have heard a lot of academic terms that cannot be understood. For example, mixed oil? Clean oil? So what's mixed oil? I'm here today to supplement your knowledge
The oil blending process is the process by which paint workers spray coloured non-transparent paint after the necessary treatment of wood (e. G. Nailing, sand paper, scraping). Mixed oil is also known as “mixed water”. According to industry sources, the oil blending process has been in use for a long time, with no stylish or obsolete differences, but only with advances. This method provides more colour for wood and more options for personalization。
The oil blending process is divided into different construction processes, such as paint spray, painting and painting, with its own characteristics。
The normal process is painting, which has a general effect and is scarred on the paint membrane and does not constitute an advanced process。
The medium- and advanced processes are dominated by spray paint or varnish, and the surfaces of the sheeting are not very demanding, and are generally covered by a large core plate, with a pine or curry, and a hardwood intake, such as a turbo, and a density plate。
Painting is advanced, wood and bottom treatment is the same as the intermediate process, but unlike the painting process, paints are coated with defamined cotton, diluted nitro-magnetic paints, slowly rubbed on wood surfaces, typically covering more than 10 times, to achieve good results。
In general, the “mixed oil process” is more technically demanding for paint workers and operates more time-consumingly; therefore, “mixed oil” prices tend to be higher than “cleaning oil”。
Process defects: one is the ease of yellowing of paint membranes, so that, in construction, a little black paint or blue paint colour is eventually added to the paint, making it difficult for paint membranes to be yellow in light; and the second is the ease of cracking at the wood interface, so that careful handling of the interface is necessary and the wood line must dry in order to achieve a successful result。
The combination of "clean oil" and "fill oil" is better used
Two processes have a similar useful life after the formation of the paint sheet. Since the two paints are similar in production, the biggest difference is that paints are coloured in paints. “clean oil” and “composed oil” have different effects, and experts have suggested that it might be better if designers were asked to use the mix。
