I. Description of hp series hydraulic cone shredder equipment:
The multi-cylinder hydraulic cone breaker was developed on the basis of the spring cone breaker, so its basic structure is similar to that of the spring cone breaker. The multi-cylinder cone breaker, which is more easily adapted to the mine vents because of its insurance, adjustment and lock-down use of hydraulic devices, has a low load factor for non-fragmented objects, and is easily removed from non-fragmented objects that are contained in a broken cavity, is in good use。
Ii. Characteristics of hp-series hydraulic cone shredder equipment:
Increased attention and processing capacity
2. Increase speed, power and fragmentation
3. High cone selection centre to optimize cavity design
4 the lining is thickened to extend the life
5. Hydraulic motors to replace hydraulic pushers and 10 minutes to disassemble the cones
6. High production and mining content
7. Key components employ high-quality materials with appropriate weight increases and greater reliability。
Iii. Hp hydraulic cone break-ups:
1. Hp-type cone break main axis, with a lower-end hyperheat fixation in the base of the shredder, with a moving cone placed on the main axis through a spherical balconium, with a tendentious thrusting of the cone around the main axis
2. Hp cone breaker main axis is thick and short, with greater fragmentation
3-hp cone break-ups are large and the slopes may affect the pass volume, but the hp cone breakers use a large eccentricity to compensate for the failure of the breaker structure
The main axis of the hp conical breaker is not only large for the mine, but also for the protection of the breaker, due to the absence of a top support point
