The domestic commercial central air-conditioning centre, a company specializing in branding, type of air-conditioning/central air-conditioning maintenance, design, installation, cleaning maintenance and spare parts replacement services, sincerely invites a wide range of new and old clients to call for advice!
Service flow: appointment service — initial communication (master's initial communication appointment time, electrical brand, model, failure, contact and address) — door-to-door survey — programming — cost determination — contracting — start maintenance — provision of warranty。
Dalian city central air-conditioned repair is too sophisticated
In mid-september, the weather cooled, the temperature set was cooled when using air conditioning, maintenance was also performed when there was no mediation, and the following minor maintenance recommendations were collected。
01. Long-term decommissioning requires attention
Central yang air conditioning
Power cuts are generally not required during the change season, as prolonged power cuts result in the deposition of lubricating oil in compressors, which requires six hours of preheating before next use, bringing the lubricating oil to working temperatures and causing damage to the compressors through direct openings。
Walled or cabinetr
Wall-mounted or locker machines are not used for long periods of time to remove plugs。
02. Regular cleaning and maintenance
The air conditioners, which operated throughout the summer, may already be adsorbed in the interior with a lot of dust jun, which will be blown out in a few months when the air conditioners are activated again, causing secondary contamination of the indoor air and therefore must be cleaned and maintained。
It is recommended that air conditioners be washed before they are reused, after they have been discontinued, to prevent the breeding of fine jun。
03. Remote air conditioning maintenance
After a summer, not only air conditioning, but also simple maintenance of remote controls. It is recommended that remote-controlled batteries be removed after use by air mediation to prevent leakage of batteries. The remote surface also contains a lot of fine jun. Surfaces can be wiped, for example, by alcohol cotton, and stored properly。
