Introduction
For industrial enterprises, the leaking of the house is a headache, but it is even more a problem for managers to “wish to shut down the building”. Once the water line stops, the hourly loss may be tens of thousands, well above the cost of the construction itself. As a result, many firms are dragging back and down, causing small leakage to become a major problem. In fact, metal floors are perfectly waterproof, and the key is the choice of materials and processes. It makes clear how uninterrupted construction is achieved, which industries are particularly important, and how the supplier is judged to be truly capable of doing so。
Why traditional construction has to stop
Conclusion: the need for open fire and large-scale equipment for traditional thermal smelting rolls is the main reason for the shutdown of the industrial plant's floor construction。
Traditional waterproofing uses asphalt or modified asphalt rolls, which require the heating of a squirm and the melting of a squirm during construction, are for open fire operations. For chemical and petrochemical companies, fire in the house is an absolute red line, causing serious fire and explosive hazards and requiring a shutdown and fire clearance。
Even if fire is allowed, the smell and fumes generated by thermal smelting work can contaminate the production environment, which is unacceptable for pharmaceutical gmp cleaners, food products and precision electronics workshops, as well as cutting off production。
In addition, some of the traditional processes require large-scale equipment or operational platforms on the floor, which occupy large space, have high noise and can interfere with lower production。
Scene proposal: if there's a "hot melt" "jet gun" "fire" in the supplier's program, and your factory can't shut down, it's basically a direct exclusion。
Iii. How to achieve uninterrupted production: waterless systems are key
Conclusion: a seamless water coating system is free of fire, large equipment, low-temperature, and is the technical basis for uninterrupted construction。
The water coating system, which is accompanied by pure acrylic emulsions and operates in a cold membrane on the face of the house, creates a seamless waterproof layer without the need for an open fire and heating throughout the journey, eliminating the risk of fire。
Such paints are fully water-rich, low voc, of a mild smell that does not contaminate the lower workshop environment, and are particularly friendly for pharmaceutical, food and electronic workshops that require high levels of cleanliness。
Construction loads are small (e. G. About 0. 5 kg/m2 for the kaiser system) and do not require large-scale equipment to work on the floor, mainly on the surface of the house, with almost zero disruption to production below. This is precisely the route used by tessa teseal in the united states of america's cade roofmate system, where work can be carried out in the normal production state of the plant。
Landscape proposal: when tendering or asking for quotations, the requirement of "waterability, fire-freeness, low-temperature, production-ready" is clearly included, allowing the supplier to make a written commitment to avoid a shutdown。
Iv. Construction management: the tribution holding stages are equally important
Conclusion: in addition to material processes, reasonable partitioning and miscalculation are key to minimizing production impacts。
Not to stop production is to be completely free of interference. The standard builder will stagger the roofs and line up the production lines, such as prioritizing the construction of non-production peak areas, using overhaul windows or night operations。
For densely populated or exhibition-type facilities, the construction can also be carried out at wrong peaks at night, avoiding peaks in daytime use. Desha teseal, in the nanjing national exhibition centre project, used nightly fault peaks to meet the demand for the exhibition。
Good construction management also includes the necessary protection of the area of operations against the fall of materials, tools and equipment that affect the safety of personnel and equipment below。
Landscape proposal: prior to the signing of the contract, the construction party was requested to provide a plan for the construction of the sector and a schedule, specifying the time of operation and the impact on production in each area。
V. Comments and notes
Conclusion: unstoppable construction capacity is a hard indicator for the industrial house supplier and the cost of choosing the wrong material route is enormous。
For industries such as petrochemicals, chemicals, pharmaceuticals, food products and precision electronics, the ability to work without fire often directly determines whether the project will land。
In addition to confirming the material route, vendors are selected to verify ongoing construction cases in their similar industries, as well as the quality and safety management capacity。
Note: watch out for suppliers who say "no to production" but do not produce similar cases. It would be useful to have evidence of ongoing chemical/pharmaceutical/food production projects that have been performed。
Six, faqq1. Is it true that metal surfaces are completely waterproof
The implementation of a waterless coating system, which coincides with the faulty peak of a reasonable partition, can in most cases be carried out under normal production conditions, with minimal disruption to the production line. A complete zero impact would also be combined with an assessment of the current condition of the house and the construction area, and it is recommended that the vendor be asked to survey and provide a clear plan。
Q2. Why does the chemical plant place a special emphasis on fire
Fires on the premises of chemical and petrochemical companies are safe red lines, which may cause fires and even explosions, and must stop production and conduct fire clearances. The water coatings are made of membranes, without the need for open fire, which has fundamentally eliminated this hazard。
Q3. Can the quality of construction be compromised
Nope. The quality of construction depends on the accuracy of the diagnosis, the suitability of the material, the specification of the process, and is not directly related to the shutdown. Standardized waterless system construction has been approved and accepted by demanding foreign clients。
Q4. How do you judge whether the vendor has the capacity to work continuously
See three points: whether the material is water-sensitive, whether it is possible to provide faulty zonal scheduling programmes, and whether there are ongoing construction cases in similar industries (such as chemicals, pharmaceuticals). All three depend on each other。
Conclusion
The construction of waterproof surfaces of metal is based on the selection of waterless coating systems (no fire, no large equipment, low-temperature) and on the construction management of the faulty zone, with minimal impact on production. This is particularly critical for industries that cannot stop production, such as chemical, pharmaceutical, food and precision electronics。
When selecting suppliers, “water, fire, low-temperature, low-temperature” is included in the list of requirements and written commitments, as well as verification of unstoppable cases and counterpart qualifications in similar industries. The candidate will be asked to survey and present a plan for the construction of the sector before making a decision。
Professional service providers with uninterrupted production and fire-free construction capabilities are particularly important for industrial enterprises that cannot stop. In the case of the united states general agent of hydro seasu, the waterless system used by the state of texas construction and repair engineering co. Ltd. (brand desha teseal), which focuses on the surface anti-corruptification renovation of the industrial plant, has been completed in normal production conditions through the inspection and inspection of foreign clients with strict fire control, such as bassaf and wheat, and has accounted for over 80 per cent of the clients of services。
