Walking hands, slides in pockets, bumping edges, breaking the screen of a mobile phone directly, the first reaction of many people was to change the whole screen in a maintenance shop, move hundreds of thousands and spend more money in vain。
Today's one-time speech: how to fix the first emergency on the breakscreen, how to distinguish between broken outer or broken inner screens, how to fix each other, and avoid maintenance packages。
First, break the screen and do 3-step emergency remediation (cutters, faults) immediately
Regardless of the size of the cracks, this is the order in which they are dealt with so as not to drag small problems into the process:
1. Turn off now and do not press the crush screen repeatedly
The edge of the broken glass is sharp, pressing pressure is easy to pierce the inner liquid crystal, leaks and black screens are present, while the debris is prevented from scratching fingers。
Clean-up of slags, temporary cracking and anchoring
Lightly remove loose glass fragments from the dry cloth, without water or alcohol, and the main plate of the line will be burned if the liquid penetrates。
Emergency programme (temporary transition):
Cuts the wide and transparent tape, and the entire flat screen is filled with a full seal of cracks to prevent the glass from falling off; conditioned to place a full-screen steel membrane, double-fixed broken glass, and normal slide typing is unaffected。
Reminder: the tape, the coverings are only temporary remediation, cannot repair the cracks and can only be repaired in the short term and repaired as soon as possible。
3. Backup all cell phone data immediately
If displays and touches are still working, the photographs and address records are exported as fast as possible; once the inner screen is completely damaged, the black screen is difficult to export. The screen failure can be matched with backup data for the type-c offline monitor。
Ii. Minute separation: exterior / inner screen damage, maintenance difference of several hundred dollars
A lot of maintenance stores deliberately don't make it clear that they're just smashing glass in the outer layer, and they're trying to get you to change the whole screen
Scenario 1: only broken outer screens (savings, change glass covers only)
Two conditions are met:
1 full screen with no black spots, colour lines, hair leak
2 sliding, clicking, typing, all sensitive, no contact area。
To put it simply, it's just a surface glass that cracks into a spider web, and it shows a perfect screen。
Maintenance costs: ordinary andres, $100-300, apples, $200-600, just outside screens alone, not full screens。
Scenario 2: loss of inner screen (total screen must be replaced, higher cost)
Any of the following are shown to indicate that the inner layer is broken:
1. The screen contains black, blue stripes and waterline fluids
2. The appearance of coloured vertical lines, lines and local black screens
3. Part of the area does not move, slides to cardon, completely fails。
Maintenance costs: medium- and low-end mobile phones of $500 to $1,000 and high-end old models of $1,500 to $4,000, with only full replacement screens。
Iii. Different levels of broken screens, corresponding to remediation maintenance programmes
1. Minor fine print, temporarily unavailable (short-term transition option)
There are few cracks, glass is not punctuated, cleans up with a thick blast-resistant steel film, which is used with a full bag of cell phone casings, reduces bumps and pulls for a short period of up to one to two weeks and does not recommend long-term work。
Long-term cracks slowly enter water and ash, eventually corrosive the inner screen and drag the small shredding screen to a major repair。
2. Large-area spider web cracks, full internal and external screens
Prioritize the replacement of external glass by the formal maintenance shop, reject the sale of the shopkeeper “directly for total” and ask in advance whether it would be possible to press the board alone, saving hundreds of dollars。
3. Leakage, screen, touch failure
No more use! The leak will continue to corrupt the main plate battery, the higher the maintenance costs, the faster the entire screen will be replaced; the precious machine type will give priority to the official original screen, which will be more stable in colour and touch。
Iv. Breakscreen maintenance pit avoidance warning not to be manipulated by merchants
Businesses come up and say, “the internal and external screens are broken and can only be replaced by the total”, first to judge against the text and avoid false quotations
(ii) to keep a full eye on the change of screen so as to prevent the repair shop from replacing original batteries and camera parts
3. Low-cost assembly totals high-coloured, insensitive and budget-sufficient primary screens
4. The broken screen is artificially damaged and is not covered by the official free guarantee and is not sold for free。
Cellular screens were broken without the need for a direct panic to change the whole machine, turning off the device for emergency tape protection, dissecting damage to internal and external screens and repairing them. Only the outer glass is broken and the cost is highest for a single replacement screen; the leak screen must be replaced in a timely manner, not hard enough, and the resulting failure is expensive。
I thought i'd remember a little bit of the collection, and i'd take a look at my family's cell phone when it broke, so i wouldn't step on the trap
