Since its inception, the electric kettle has rapidly become popular in the north and south of the great river, with a general trend. Electricity canteens are expensive, easy to use, simple in structure, and it is natural to be popular. But once the pot is broken, it makes it difficult: it seems uneconomical to fix it, and it is impossible to fix it. If only you could fix it yourself. Let's learn how to fix the canteen。
The electric kettle was born in chicago in 1891. With the development of technology, rapid, safe, accessible and fully exploited energy has become a major feature of the pot, and tea-eating british have since fallen in love with it. By the twenty-first century, it will be a global best-selling product. The electric kettles use vapour-intellectual sensor-controlled temperatures, with automatic power outages after boiling water and dry-burning. As life needs, the current electric kettle is also moving in a multifunctional direction, such as leak prevention, heat prevention, water locking, etc. The kettle has the advantage of heating speed, temperature protection, filtration and variety。
How can the electric kettle be repaired? When normal, the electrical resistance is platinum at the time of failure to press the re-entry switch, and the corresponding resistance value of 1,500 w electric kettles at the time of pressing the button is about 32 times。
How can the kettle be repaired ii: if the barrier after pressing the button is still platinum, it means the heating tube circuit is out. At this point, the canteen 3 core plugs n and l can be measured as resistance at both ends, with normal values as above. If the results are normal, indicating that the fault is in the bottom, the power lines and the bottom outlets should be checked for broken or poorly connected, and the base structure is simple and the fault is generally quickly located。
How can the kettle be repaired three times: if the electrical resistance is measured to be still platinum, which means that the failure is in the electric circuit of the pot, the handles, etc., should be removed and repaired. The focus is on power (re-entry) switches and temperature protection switches. Table rx1 can be used to check whether switch action and contact breakup are good。
Because of the relatively simple structure of the electric kettle, the failure is relatively simple, and repairs can be done successfully if they have the appropriate electrician base. But when we repair it, we must be mindful of the safety-first principle and not lose sight of the big problems. If you want to know more about how to fix the kettle, you can go to this site to introduce the information on the page。
