More recently, a 3d printer named “creature hi” has been charged $689, which is not a temporary downfall of activity, but a direct hang-up, plus an extra $700 coupon, which is less than half the original $1,200 price price, knowing that it sold $1,200 in february of last year, down to $799 at the beginning of the year, and is now falling to $689 at once, even the a1mini, which has been stabilizing at the 700-dollar slot, is barely holding。
The first reaction is to feel that the product could be reduced, open a shell check, and find that the frame is based on a single-pressed aluminium structure, with a print speed of 500 mm per second and an acceleration of 12,000 mm per square second. These data are put in the past and only a 1,000-dollar machine can be marked, and more importantly, the machine can be automatically calibrated with a full automatic alignment, without a manual scraping or screws, and the first layer of glue often encountered by new hands. The problem was largely resolved, with a screen size of 3. 2 inches to support touch operations, and access to mobile phones to view real-time images, with warnings issued in advance before printing was about to fail。
I also looked specifically at the color extension of the machine, which could be printed in two colours on a single machine, with four cfs smart modules, with a maximum of 16 colours. Most of the machines at the same price on the market could only be printed in single colour, and had to stop working on them in exchange for materials. This was clearly designed to facilitate hand-made small things, not toys, but not industrial equipment。
A1mini used to have a very good reputation, good stability and a strong brand name, but the idea was straightforward, not to use the brand to tell stories, but to use the supply chain to reduce the overall price of core parts such as electric power, track and hotbeds in the country by more than 30 per cent since 2025, as well as to provide more traffic support to the white factory. Users, instead of inventorying, use the hi series as an introductory tool for digital production, in line with steam courses in primary and secondary schools, as well as the audio-visual content of the 30-second printing of a blind box。
However, there are pits at low prices, and second-hand hi equipment of $589 is hanging on idle fish, but the notes are only available locally. Without official sales, i asked a few sellers, some of the main boards were misreported for six months, electric noise was increased, solids could not be upgraded, the new aircraft had $689 packaged for a year with a warranty, which would cost about $200 for two months and $100 for a second hand, but possibly even more。
It promotes the idea that “10 minutes to learn to print 3d”, which sounds like an advertising term, but the same is true of the actual experience, with step-by-step guides in the app, touch screens being simple, cameras taking late videos, and the entire printing process being clearly visible. I tried with a friend who had no contact with 3d printing at all, and it was true that there was no more than 15 minutes between opening the box and opening the first little dinosaur, and there was no error in the middle, and the steps that had been taken before using the entrance machine to read the curriculum, find the video, and ask people in the crowd had been saved。
Now, looking for 3d printers, the idea that hi has a transformation rate that exceeds a1mini, is not to say that it's bad, but that the price standard has changed. When a machine is cheap enough to buy it at hand, it ceases to be an object of interest and becomes a daily tool。
This design has a very careful detail, and when the product comes out of the factory, it turns off the automatic hibernation, fearing that the user would accidentally fall asleep at the time of the first printing, causing the model to be broken, and that they spend more time in these small places than simply stacking parameters。
