Recently, many of the new neighbours who are in the middle of the renovations have been throwing up, focusing on large items such as cupboards, tiles, and smokers, except for the kitchen ceiling, which is used as a small item and is loaded with a single item. It's not until you find out that thousands of fine kitchens have been dragged back by the aluminum buttons on top of their heads。
It's either loose for a while, or the oil stains are dirty, old and messy. In fact, there are a lot of doors inside the kitchen ceiling, many of which are recommended by the merchants, picked by the wind and stepped on the pit without realizing it. Today, in the light of my own experience, i would like to talk to you about the nine issues that are most likely to be encountered with the kitchen aluminum buttons, and i would like to see more of the friends who are going to be refurbished or ready to change their ceilings。
Let me ask you something, did you look at the price and the color when you chose the aluminum button? In fact, the kitchen is not the same as the other rooms in the home, where fire and cooking are conducted on a daily basis, and the temperature is high and low. In such an environment, good-looking ceilings are the second highest priority, with strong and durable use, good management and safety. The price of the aluminum buttons on the market is very large, ranging from a few dozen to hundreds of square metres, and the outside world is not well divided, it is unsatisfied and it will only be more and more disturbing。
A lot of people buy plates in the wrong place: the thicker the board, the better the quality。
When travelling to the building materials market, the sellers always strongly recommend a large increase, stating that 0. 8 mm and 1. 0 mm plates are more durable. A lot of people want to spend more money on it, so they'll just put it down. Honestly, it's really been taken away。
The aluminium buttons that we use in the kitchen, which are recognized in the industry to be between 0. 6 and 0. 7 millimeters, are perfectly sufficient for daily use and normally do not deform and fall. The core depends on the aluminium itself, not just the thickness. Some of the poor plates look at the sankness and overheat, using recycled aluminium, with thick surface coverings to increase weight, feel hard, have poor physical resilience, and in a short period of time bending and bending. Retrospect of formal products, standard thickness combined with raw aluminium, flattening of the panels, and collating with tight threads that have been stable for more than a decade. So let's stop chasing the thick board, the material is real, and it's far more important than the vanity。
There are also many friends who prefer light ceilings and feel like they're out of the house, looking clean and in the atmosphere。
Have you noticed, however, that the top of the kitchen itself is equipped with lights, coupled with natural light coming through the windows, which is particularly reflective of light panels? When cooking, the light is shining, and the roofs are full of flashlights, which are in such an environment for a long time, and the eyes are prone to sour fatigue。
And there's a very short panel on the surface of the light, and a little bit of oil can be seen clearly, and it's much harder to wipe than dumb face on a daily basis. The slabs are different from those that are dumb and sandy, the light is soft and unobserved, and light oil stains are not easily visible, and can be cleaned up with wet rags once in a while, especially for kitchen use. Of course, it is not completely impossible to use light panels, and if there is small room in the kitchen, light is poor, small space is fine, the whole room is filled with light, which is not recommended。
It is common practice to bargain over materials for renovation and purchase, and the price of aluminum buttons is grinding and grinding, and it is thought that the master is a bargain. But the vast majority of people would ignore the small parts of dragon bones, suspensions and strips, and would use whatever the merchant suggested, without asking for more。
Old people who know about renovations often say that the ceiling is only part of the sheet and that the fittings and fittings are fundamental. Dragon bones are the same as the entire scrambling skeleton. The scaffold is unstable and the perfect plate is white. The kitchen is always damp, and the water is still unspoiled, and if the poor, rusty, general fittings are made of thin iron skin, the fittings are slowly rusted and loosely in less than a year and a half. At that time, the ceilings would be swayed, the door of the walk, the switchboard would hear the ringing of the head, and there would be a serious loss of the button and a serious security hazard。
It is also difficult to clean up because of poor plastics, which can be yellow and fractured over time, and because of the oil in the gap connecting the wall. It is recommended that you choose the thicker paint and light steel bones, and that all hardware be identified with stainproof materials, so that you do not leave a long-term problem for the sake of saving dozens of small dollars。
The budget for the renovation was tight, and it was normal to save the province, with dozens of square metres of low-priced aluminum buttons in a small shop on the street, which attracted a large number of candidates to buy it, as the price was high. But low-priced plaques, there's a lot of danger。
In the first instance, environmental insecurity, the coatings and coverings of the surfaces of poor-quality plates, in relatively closed spaces such as kitchens, are slowly spreading aroma and long periods of time in such environments do not benefit health. The second is rough work, the edges of the sheet are stale, and the sutures of the sutures vary in size. Not only do they have a reduced face, but they also accumulate oil, dust, and are easy to hide over time. This, together with the fire-proofing and oil-contaminated capacity of such plates, the proximity of the kitchen to the source of the fire and the high temperature, the surface coatings will fall off and change colour, the whole ceiling will turn yellow and black for two to three years, and a good kitchen will suddenly look old. Budgetary constraints do not matter, rather than pursuing a high-end model, the basis for selecting popular brand names is sufficient, and parity is good, so let's not touch unqualified products。
Large-sized aluminum buttons were particularly popular in the last two years, and many felt that the large plate was less slit and looked at the atmosphere as a whole, regardless of the size of their kitchen, and were determined to be installed by the wind。
To be objective, a large, large, home-sized kitchen with a large plate does look good. However, it also has obvious short plates, which are sold at higher prices, as well as more stringent requirements for dragon bone weights and workers ' installation. If the kitchen is small, has a small size and has a large corner, there are various pipelines on the top, and it is extremely difficult to tailor it, and it is difficult to collide the edges and appear to be messy。
For our average family, 300 x 300, 300 x 600 is the best option. The flexibility of the installation is such that it is convenient to replace a piece of a plate that is damaged at a later stage or a leak in the top pipe. To sum up briefly: large kitchens and household formulas can be considered for large panels; small household sizes, cornerings and pipes are numerous, routine sizes are chosen with integrity and practicality。
There is also a detail that can easily be ignored: when a chandelier is installed, all lines on the top are shut down without any active location。
The workers' situation is not well thought out, and now they look at it, but when the pipes leak, the circuits fail, or the gas pipes need to be repaired, the problem comes. The top line of the kitchen is complicated and normal, with no room reserved for overhauling, and maintenance staff are forced to break buttons, which can easily be deformed and fractured during the operation, with a proper ceiling being destroyed。
In fact, the solution is particularly simple, without the need for additional separate openings, and in key locations such as pipe valves, circuit wire boxes, gas pipelines, it is sufficient to keep a few detachable buttons as a simple overhaul. The challenge of future maintenance can be resolved neither in terms of overall beauty nor in terms of future maintenance, a step that must not be left idle。
The handling of smoke vents from the gas machine is also the key to determining whether or not the ceiling is working, where many families are stalked。
The smoke pipe of the oil-smokeer is to go through the inside of the ceiling, and if the gap between the pipe and the button is not sealed, the smoke from the cooking is to enter the ceiling along the gap. With a build-up of years, dragon bones and the back of the plate will be thickly oily, invisible, but they will continue to dazzle the smell of oil and smoke, as well as to breed bacteria。
There are also a number of masters who, for construction purposes, flatten the pipe, bend it to a large extent, lack the pipes, directly reduce the fumes efficiency of the oil-smoking machine, and the smoke in the kitchen is scattered for half a day. It is recalled here that the installation must be carried out in such a way as to keep the pipe as straight as possible and to seal it with sealed materials so as not to allow smoke access。
There are a lot of people who choose the ceiling color with their preferences. Either the whole house is white or the colored, colored and complex style is chosen, which is completely uncompatible with wall bricks and the whole cabinet style。
It's a classic white, but if the wall tiles are also light-colored, the whole house is white, the whole atmosphere will be tedious and without a sense of hierarchy. The choice of flecks, complex buttons, which are fresh at the beginning, but the kitchen itself has a lot of appliances, cooks, and the flaunted ceilings make the entire space so crowded and tiring that it can easily be seen。
To share a simple mix of ideas: the wall tiles are shallow, the ceilings select the same colours as gray, white, and the styles are uniform and soft; the cabinets are dark in colour, and the light-colored ceilings are used to balance the vision. Precedence is given to pure luminous luminaries, which, even after more than a decade, will not be obsolete, and complex grafts will be avoided as much as possible。
Finally, with regard to the renovation process, the sequence was mistaken and subsequent renovations would be particularly costly。
A number of owners and workers reversed the process by installing all the clinkers of aluminium, then installing smokers, water heaters and cabinets, and finally finding that the size was not right, that the links were too wide, and that the adjustments were not satisfactory。
The correct order of construction should be to complete the construction of the wall, to determine the location and route of the smoker, the gas heater and the pipe, first to fit the cabinet frame, first to line the smoke pipe, and lastly to install the aluminum button. If the ceiling is completed early and the cabinets and smokers are added later, the plates will be subjected to repeated tailoring, not only to undermine the integrity of the ceiling, but also to prevent sealing. In addition to this, electrical appliances such as embedded lamps, chillas and air-changing fans must be synchronized with the prepositioning, wiring and later reloading, which is difficult to double and easily damaged。
All nine of these problems are the result of high frequency during the renovation of kitchen ceilings. In the final analysis, the selection of the ceiling does not blindly pursue high prices and fancy styles, but, combined with the actual characteristics of the high-smoking, wet-heated kitchens and multiple pipelines, it is sufficient to control the details of the board, the quality of the parts, the installation process, the size mix and the order of construction。
Hanging is not the main object of the renovation, but it affects our daily use experience. Don't be sorry about this small ceiling。
Speaking of which, i'd like to ask your friends if you've ever had any of these problems when you've been redecorating and choosing the aluminum button. Or do you have any practical ideas for choosing, installing and sharing in the comment area。
