The domestic commercial central air-conditioning centre, a company specializing in branding, type of air-conditioning/central air-conditioning maintenance, design, installation, cleaning maintenance and spare parts replacement services, sincerely invites a wide range of new and old clients to call for advice!
Service flow: appointment service — initial communication (master's initial communication appointment time, electrical brand, model, failure, contact and address) — door-to-door survey — programming — cost determination — contracting — start maintenance — provision of warranty。
Central air conditioning maintenance in guilin city is overstretched
Air conditioners are not fully installed and, if they are not installed, they can cause considerable follow-up problems. Before receiving it, you must do the check! Here's a story for you:
1. Inspection of installation locations
On acceptance and inspection, check whether the air conditioner installation is in line with the drawing design, and whether the discrepancies are communicated in advance and determine the location and suitability of the installation。
Checking whether there are barriers around the inside air conditioner vent, checking whether the outdoors are secure and setting up to avoid as much as possible the amount of oil, sand and sand, and direct sunlight would reduce the useful life of air conditioners。
2. Check for compliance with pipe installation
The direction of the various air conditioners lines is to be kept flat to see if the drain is tilted. Ensure smooth discharge of condensed water. The main power supply and the control line for the interior machines are installed。
3. Be careful whether the material is suitable
The materials used in air conditioning are generally preservative, and the ventilation pipes use non-combustible materials. Check whether the installation of the support material is satisfactory。
4. Test effects met
The important thing for air conditioners is their use, which, at the time of acceptance, needs to be checked for vent vent venting, to record temperature changes every two hours and to judge their cooling effect. The controller is fully functional and operational。
5. Noise testing
Domestic air conditioners are operated with little noise, no vibration, and fans operate smoothly, and repairs should be performed in a timely manner if vibrations or noises occur, possibly as a result of inappropriate installation。
6. Check for leakage
After some time of operation, check whether the air conditioner is leaking. In the case of power outages, there is a need for a dedicated installation of personnel to test the ac power supply using a dedicated ye power source detection tool to determine whether or not the ac is leaking。
