The hair washing machine does not drain and does not dry up fault maintenance。
It's another washing machine today. It's a hal's full automatic wheel washing machine. The sign is right here, next to the model. He had just communicated with the client, saying that the washing machine was able to wash normally, and once it was dehydrated and dryed, he heard the sound of squeezing inside the washing machine, and that there was no normal drainage and no drying。
There is now a need to bring down the washing machine, to remove the back of the hood and to press the dehydration button to see what is happening. It's just been dehydrated, and now it's looking at where it is. It's the point of the finger. It's a drain-thrust valve. It's got to be damaged, causing a lack of pull. Nor can the brake poles of the clutch be pulled up, resulting in no drainage and no normal drying. Now the problem is locked。
The exhaust valve has been removed and the line is a straight cut of two lines and a zero line of fire. This is the old one that's taken down. This one's new. It's identical. It's from a factory. Two lines, both positive and negative, and two screws, with a wrench。
Now that you've installed the machine again, the new one is already in place, two screws, just put it in here, the two wires are open, the wires are all fixed. Press dehydration again, see if this thing can pull it over, normally to this position。
The new drainage valves have been installed, and once again the dehydration is pressed to see if the sound of the tungsten is still present. Now press the power source, dehydrate alone, press start, and look again at the drain valve and do not pull again. Look, this place has been pulled back. It's gone. It's gone straight to the normal swing. It can't be done now. It's done。
The video is shared here。
