The use of genuine machines in outdoor car advertisements is still very extensive, and outdoor car advertisements are widely publicized, as are machines, digital products, etc., in addition to food beverages, domestic daining, etc., which not only cover a large number of people, but also have a strong visual impact and a relatively low cost, which is why so many people are willing to advertise。
The painting of outdoors is a good medium for publicity, the advertising of outdoors is more expensive, and the crowd is very large and can achieve a good publicity effect. It is also recommended by a variety of spray-printing advertising companies today, operating with simplicity, colour and ease of construction, and is widely used in such areas as mobile media such as subways, commercial boards, etc., and in such areas as site, window and building decorations. It is important to remember, however, that in order to achieve a better quality of the print-out, it is important to select a high-quality print machine to print the sticker so that it can have a good publicity effect, such as the very clear, authentic, colour-rich, durable, and non-colourable effects of the shenzhen series. Shenzhen's real machine is not only stable, sophisticated, fast, but also very simple to operate, so users can use it。
In addition, shenzhen wuteng wrote the real machine to share some of the techniques used to print machine stickers:
As for the reasons and the solutions that the car stickers are likely to cause a product rise:
The unevenness and quality of car fares on the market, as well as the variety of problems that can be encountered, are often confusing and reactive. The main reasons for starting the arch when the machine is printed are the following:
1. Sensitivity of the vehicle to moisture. Single-sided pe paper, if the product storage environment is too different from the spray operating environment, can easily suck or lose water, thus causing bottom paper to start when the spray is printed。
2. The long stay of the sticker on the heating machine caused by excessive temperature setting during the printing of the product resulting in a discrepancy between the inflation rate of the paper and the mask. And the tension system when printing the genuine machine is not properly calibrated, which can easily lead to problems when printing sprays。
The solution is to place the car close from the low temperature and more than 24 hours in the spray operation environment, so that the body closes to a stable state before the spray operation takes place, with the best print temperature being 35°c ~40°c. This can be effectively avoided by qualified users who preheating the product before opening the heating system, adjusting the projector's tension system and controlling the tightness of the roll. Of course, a high-quality, mobile vehicle closeness can be an effective means of avoiding these phenomena。
