What are headsets, so-called headsets, is actually a kind of wire-wiring device that can wrap the headphone wire together without causing a mess, affecting beauty and use, providing great help in listening to music or office, as the use of headphones increases, and sometimes making it difficult for us to use it because of the excessive length of the earphone wire, which can be a good solution, so what should we do with headsphones? Now let me teach you how to use earphone wires that are common。
Methodology
I. Apple earpods ear-wipe
First, let's look at the shape after the apple earlpods circuit is completed. So how do we get around this? I'll take the earpods out of the wire and start decomposing。
Step one: put ear plugs in the box, keep an eye on l/r positions, of course, and it's simple。
Step 2: this is the point. First, the left one. The root earphone line turns to the left, but not around the circle, but around half through the middle dent。
Step 3: round the right side of the right side of the wire-controlled earphone line and then put the line-controlled face up into the middle dent。
Step 4: by the reverse clockwise. It needs to be noted that there's a branch on the line, and you have to place it in the right space to avoid a lid that can't be covered。
Step five: maintain normal forces around the line, not too loose or too tight until it's completely around the appleearpods。
Step six: cover the lid, keep an eye on all four corners with a box and stick tight。
Fish bone circuiters
Fish bone circuitrs are a small piece of receiving wire, designed to be novel and simple, particularly for earphone wires, power lines (or other wires suitable for entanglement). Let's leave the room alone。
In addition to being used as a circuitr, fish bones can also be used as a key button, a mobile phone lockdown and a small sticker. Cute, real fish bones, simple, smart enough to shine!
1. Fish bone circuitrs are made of silicone materials without prejudice to your ropes;
2. The surface and edge of the product have been smoothed, with flat-lined hubs of approximately 7 cm length (range from the top to the middle of the fish's tail);
3. A variety of colours are optional, foldable, non-fragible, easy to wash, naturally dry and immediately used;
4. Method of use: headphone wires pass through the line, wrap them around a silicone stick, and use simple。
Iii. Methodology and use of headphone wires
First of all, you need a hard paper, or plastic, and if you have an abandoned bank card, that would be great. The bank card is too wide, and you can cut it in half, depending on your needs。
Then two gaps were reduced. One gap above, one gap below. The gap is characterized by a tight interior, where the narrowness of the gap only allows the earphone line to pass, so that the earphone line can be jammed. And there's a gap that can be cut as long as possible, so it's safer. Now, your earpiece circuits have been made, and the next thing you know, is the way around. First, a head is stuck to the gap above, then entangled in the middle of the circuitian, and the tail is stuck to the gap below. When you're using it, let go of both of them and try to keep them as long as possible until the right length。
With the production of different types of headsets in the market, there are often different types of wires for different types of headsets, and how headset wires should be rounded and used is increasingly the object of our pursuit. Given the many different types of circuiters in the market, they are also different, and it is believed that the three different types of headsets above can be of great assistance to you in better wired。
