As the pace of life accelerates, the electromagnetic furnace becomes an important tool for cooking. Electromagnetic furnaces also inevitably suffer from malfunctions during their use. This period refers to frequent malfunctions in electromagnetic furnaces and handling methods so that you can resolve problems quickly。
I. No response from the start
There was no reaction from the electromagnetic furnace when it opened the power switch。
Causes of failure:
1. Power plugs are poorly exposed or power lines are damaged。
2. Damage to internal parts of the electromagnetic furnace, such as power panels, control panels, etc。
3. Fusing fuses。
Treatment:
1. Inspection of power outlets and power lines to ensure normal connection。
After the power has been cut, the shell of the electromagnetic furnace is turned on to check whether the internal component is clearly damaged. If damaged, replace the corresponding component。
3. Replacement of fuses。
Ii. Uneven heating
The electromagnetic furnaces are heated unevenly, partially overheated or not。
Causes of failure:
Cookers do not meet the requirements if they are light or heavy。
2. The placement of the pots is incorrect, resulting in a lack of normal induction of the electromagnetic furnaces。
3. The furnace has an alien surface, which renders the electromagnetic furnace sensors unable to function normally。
4. Damage to internal parts of the electromagnetic furnace, such as toll rings, power adjusters, etc。
Treatment:
1. Replacement of casseroles that meet the requirements。
2. Repositioning the boiler to ensure that the electromagnetic furnace sensors function。
3. Clearing of surfaces of furnaces。
4. Check internal components and, if damaged, replace corresponding components。
Iii. Warnings
The electromagnetic furnaces show warning signs during heating and stop heating。
Causes of failure:
1. The high temperature of the pot triggers the protective mechanism。
2. Unusual conditions such as lack of water and oil。
3. Circuit board failure。
Treatment:
1. Check the temperature of the pot to ensure that it is not hot。
2. Check water, oil, etc. Additions to ensure that they are sufficient。
3. Check circuit boards and, if damaged, replace corresponding components。
Cannot start
After pressing the start button, the electromagnetic furnace did not react。
Causes of failure:
1. Bad key exposure。
2. Damage to internal parts of the electromagnetic furnace, such as the main plate, control panel, etc。
Power plate failure。
Treatment:
1. Check keys to ensure good exposure。
2. Following power outages, check for damage to internal components and, if so, replace the corresponding components。
3. Check the power panels and, if damaged, replace them。
V. A sudden blackout
The electromagnetic furnace suddenly lost power during heating。
Causes of failure:
1. Unstable power sources, resulting in the normal operation of electromagnetic furnaces。
2. Damage to internal parts of the electromagnetic furnace, such as fuses, power panels, etc。
Treatment:
1. Ensure the stability of the power supply and, if necessary, use equipment such as pressurers or ups。
2. Check internal components and, if damaged, replace corresponding components。
The above is the method of dealing with the failure of the electromagnetic furnace, but for some complex malfunctions it is advisable to contact professionals for maintenance. During the use of the electromagnetic furnaces, normal use is maintained and the use of the electromagnetic furnaces is regularly checked, which can be effective in avoiding failure of the electromagnetic furnaces。
