I didn't know until today that the lights could be repaired with a remote. If you don't have a light at home, you can fix it with a remote. All are aware of the maintenance of this lamp, the use of electric pens for the maintenance of the circuits and the use of a universal watch. But it's the first time i've heard of it, the first time i've seen it. Now, let me make this simple for you。
First take the light off, it's got screws on it, take it off。
• open the screw and open it, so that as long as one of the lamps does not shine, one of the lamps does not light the entire led. How about a remote now
Turn on the remote control, find two more wires, cut the wire from this part and remove the wire。
• then put the wire on the remote control, which will put it in there, and that's it。
Now use these two lines to repair the remote control and the lights. It's important to put the line right. It's got to be solid. Now, let's check the beads, see which ones are detectable without light. As you can see, the light beads do not shine when they are tested and damage is done if they do not。
This is how all the bells are tested, and each bell is tested, and the unlighted beads will soon be found, and the light bells indicate that the bells are good. This method is very simple, as long as a light bell does not shine, signs the light bells, replace the damaged bells, or shorts the damaged bells directly, and the led beams are lit。
This is the way to fix the lights with a remote control. It's very interesting, and i want to help you. Thank you。
