Turning the win7 computer into a wifi hot spot for cell phones, notes. BenShared internet
A wireless local area network (lan) is built with a win7 network, which allows the sharing of lan games。
Enable hidden functions for windows 7:Virtual wifiTogether with softap (or virtual wireless ap), computers can be turned into wireless routers, with shared access and savings on network fees and routers。
The mainframe is a laptop with an operating system of win7。
Host settings are as follows:
1. Run command hints as administrator:
Shortcut win+r input cd back
2. Enable and set up virtual wifi web cards:
Run command:
This command has three parameters, mode: whether the virtual wifi web card should be enabled and disallow is disabled。
Ssid: wireless name, preferably in english (for example, wuminpc)。
Key: wireless password, eight or more characters (in the example of waminwifi)。
The above three parameters can be used separately, for example, only mode = disallow can directly disable virtual wifi web cards。
"netsh wlan set hostnetwork mode=allow sid=ace-pc key=12345678"
After the command was successfully runNetwork connectionsThere will be an additional card for "wireless internet connection" (which will take about a minute to wait), renamed virtual wifi for convenience. If not, just update the wireless card drive。
3. Set up internet connection sharing:
In the "network connect" window, right-click on a network connection that has been connected to the internet (cmcc-edu here), choose "confiscated" and "allowed other n-connected" and choose "virtual wifi"。
Once determined, the word "shared" will appear next to the icon of the shared card, indicating that "broadband connection" has been shared to "virtual wifi"。
Access to wireless networks:
Continue running in command prompt:
(close the wireless by changing the start to stop, and then activate the wireless only by running the command again)
So, the virtual wifi red fork disappeared, the wifi base station was organized and the mainframe set up. The laptop, the wifi module of the cell phone is searched for the wireless network ace-pc, the password is 12345678, and the internet is shared
Displays a wireless network information command: netsh wlan show hostnetwork。
If the laptop is connected locally, it can be accessed online online, and then shared with the laptop's wireless card, we can see that the local connection is connected and the wireless network is not connected。
Set local connection after sharing
Virtual wifi after sharing enabled
Other issues:
It's probably an ip problem if you build a shared network and someone else can connect to it.
Now, there's a growing number of people using mobile phones to access the internet, but there's always a prohibitive cost of 3g internet access, and if we have a laptop with a win7, we can use it to create a wifi hotspot to share the internet. The following is the windows 7 system notebook, non-connect software method, which uses commands to create wifi hotspots。
1. Run command prompts as administrators (which are not administrator privileges if win+r moves out and enters cmd to open command prompts), right click "command prompts" and select "managers"。
2. Enter command under command prompt:
Mode=allow ssid=the name of the wireless network you want key=the password you want to set (recommended 10-bit password, at least 8-bit). Then press the car back
And then we're going to open the network sharing center -- you're going to change the adapter set, and you're going to find another microsoft wirtual miniport adapter, the wireless network adapter that we just virtualized。
4. Continue to enter command prompts: netsh wlan start hosted network. Press the car back
5. This step is the opening of the virtual wireless network just now, so that your love machine can discover the virtual network you just made。
Turning the network sharing centre on, you're now connected to two networks, one your cable network and the other your virtual network (the notebook is typically a wireless network 2)。
7. Opens the network sharing centre -- changes adapter settings, right-clicks your local connection, which is the network-connected cable card, selects attributes, clicks sharing, ticks the option "to allow other network users to connect via the internet connection to this computer" and selects the virtual network just created in the drop-down menu to make sure. Local connection settings (whose move is to restart the computer to set it up successfully)
Up to this point, the result is connected, but it does not have access to the internet, re-thinking and checking what's wrong, and then thinking for a long time, going to the local connection attribute, the "net" tab, changing the tcp/ipv4 attribute, opting for automatic access to ip and automatic access to dns
Remember the above information, then set the properties of the virtual wireless network adapter, or the general tab, change the tcp/ipv4 properties, select the ip address below, note! The ip address cannot be the same as the router's address, if the router is "192. 168. 1. 1", here it is "192. 168. X. 1"
At this point, the computer is set。
