Today, people working in companies or homes are using printers more and more often, whether you draft documents or for other uses, but whatever machine, with a long time, there's always something like that, like a printer's nozzle, which can lead to one or two black lines or a blurring of the printout. So, if that is the case, what should we do? In the following, you will be presented with two simple and effective solutions。
First one. Clean the nozzle with a driver
If printer nozzles are not so severe as to allow normal printing, only the documents printed are less colourful than before ( for example, in parts of the text that are unwritten or partially coloured by photographs) you can use the printer driver's own application tool to clear it if you don't want too much trouble!
Pesson printer driver icon, right-key attribute -- -- print preferences -- -- maintenance -- found in a printer fax that starts or controls the panel. See, there's a lot of options in it to clean the head!
Second, manual cleaning of print nozzles
When printing the output, there will be breakwires, white lanes, colours, etc., but there will still be ink in the cartridges, and this is a situation where the nozzle is blocked by manual cleaning. When the cartridges in the printer are removed, the bottom of the cartridge is found to have an integrated circuit, which is where the nozzle is located, preparing some warm water at 50°c ~60°c, pouring warm water into a clean and transparent cup, and immersing the nozzle in the bottom of the cartridge for 10-30 minutes. It is important to note that only part of the nozzle is immersed in the water and that the whole cartridge is not in the water. Indulge in 10-30 minutes to remove the cartridge from the water, shake it with moderate force, throw out some ink in the nozzle section, use napkins, suck out the ink from the nozzle, install the cleaned cartridge back, then finish the ink cleaning process, and then use the printer to print an offline test page to compare the clean-up effects。
These are the two ways of effectively and quickly resolving the problem of cleaning printer nozzles, and suggest that the first simplest method of computer cleaning should be used first, and if not, the second method of manual cleaning should be used, and that care should be taken when dismantling machines, so as not to cause them to be destroyed in a temporary manner; be careful when cleaning the cartridges and try to avoid spilling over. The problem of black lines or verbs referred to above can usually be resolved after cleaning. If this problem is still not resolved, we can find a specialized maintenance point。
