Routine maintenance of fire protection systems
These include fire alarm systems, gas detection systems, indoor and exterior embolism systems, automatic water injection systems, fire pumping systems, gas suppression systems, emergency broadcasting systems, smoke-fighting systems, hand-held fire extinguishers, evacuation instructions and emergency lighting equipment. Details of the routine maintenance services you can provide for fire protection systems:
1. Fire automatic warning system, date timing, block release, fire priority, second alert functional examination test; primary power switching test, eid maintenance; warning backway resuscitation, backway outlet, backway-to-ground resistance parameter measurement, line maintenance; simulation testing and cleaning of detection, manual alert button surveillance modules, system connectivity automatic testing, crt chart control system maintenance and optimization, system refinement and optimization, upgrading of the safety and reliability of failed analysis operations and updating of archives。
2. Gas detection systems
System mainframe functionality check, one alarm, second alarm test
Gas detector simulation tests, gas probe zero repositioning, calibration, etc
3. Indoor and outburst system
Internal configuration checks, test maintenance for pump-buttons, static pressure tests, outdoor embolism flow tests, preservation and lubrication maintenance, exterior cavity friction tests
4. Automatic water-jet firefighting systems
Two-purpose dry-wet water-fighting systems, pre-activated automatic water-fighting systems, rain showers, water curtain systems, foam-fighting systems, etc
Wet system protection content is end-of-pipe water connection testing, pipe rinsing; alarm valves, timers, hydro alarms, current indicator, pressure switches, spray head etc. Related equipment check, valve screening clean
Dry system maintenance is for valve action body testing cleaning, gas maintenance unit inspection, air discharge device inspection, system switching test, alarm valve testing, valve screening cleaning
Pre-acting system maintenance includes an alarm system single-point test, modular action test, electromagnetic valve action test, connection test, gas maintenance device inspection (or auto-start test for refill pumps), alarm valve test, valve examination clean
Rain gonorrhea maintenance includes single-point testing of alarm systems, connection testing, electromagnetic valve action testing, manual start-up testing of rain gonorrhea, valve cleaning; alarm valve testing
Water curtain system maintenance includes water curtain control valve inspection, simulation action testing
Foam suppression system maintenance includes foam tank appearance inspection, foam fluid spot examination, rapid discharge electromagnetic valve action testing, electric valve action testing, system connection testing, foam fluid effectiveness inspection
5. Fire pump system
Including fire-fighting ponds, water recharge units, pumping systems, electricity supply, etc., protection includes water level and water quality check (valid check if low water level alerts are required), water recharge test, environmental inspection of pump room (heating of pump room and internal combustion pump units when seasonal conversion is required), maintenance of valve status, cleaning of equipment, confirmation of pressure off of safe depressure valves, maintenance of pressure reduction valves
For maintenance of electric pumps:
Double circuit power cabinet switching test, control cabinet inspection site/distance, manual start-up/automatic start-up test, control switch lubrication, end-to-wire line maintenance, motor running current test log matching, water pump axis inspection and position adjustment, pump engine axis lubrication, water pump root maintenance, flow test and drawing pressure-flow charting
For internal combustion pump maintenance:
Control cabinet functional tests, charge module tests, internal combustion engine lubrication system checks (including oil volume, oil pressure, oil quality), fuel system inspections (fuel quantity, pipeline, fuel pump fuel injection pressure, fuel core discharge operations), cooling system inspections (refrigerated fluid spot checks, cooling cycle system inspections, including valves, electromagnetic valves closed, cooling pumps, heat exchanger checks), vent gas system inspections (cleaning of air filter cores, exhaust gas pipeline protection and fastening), battery gravity characterization tests and maintenance, re-routing of axes to position, pump bearings, pump root maintenance, flow tests and pressure-flow chart archiving
6. Gas fire suppression systems
Categorized as co2, fm200 (heptafluoropropane), ig-541 (smoking out), aerosol fire suppression systems according to fire extinguisher
The network system is divided into a network system and a network-free system according to the fire extinguisher mode, and the network system is divided into a modular and separate module
The system typically consists of alert control systems and fire extinguisher storage systems, which include:
Warning control system mainframe functionality test, detector test, manual emergency starter test, system connection test (including alarm, acoustic light, bottle head or electromagnetic valve, electrical air conditioning ventilation, fire valve, etc.)
Gas storage and injection system flask examination, pressure inspection, drive vessel examination, pressure inspection, venting route, nozzle inspection, bottling valve action test, distribution valve action test, electric valve test
5 years of pressure testing for driver and fire extinguisher storage cylinders and a compressed air simulation spraying test for tube networks
7. High pressure fine water fog fire suppression system
Maintenance includes water tank water level checks, pool cleaning, filter cleaning, hand-starting/automatic start-up testing for refilling pumps, automatic start-up testing for high pressure pumps, control cabinet functionality testing
On-site electric valve testing ( manual electric opening test, manual mechanical opening test, automatic electrical opening test), nozzle look check cleaning
Single point testing of alarm systems, modular action testing, connection testing
8. Dry powder fire suppression systems
Line, cabinet and suspension depending on how they are stored and transported
Protection content is single point testing of alarm control systems, modular action testing, connection testing
Dry powder storage container appearance check, pipe inspection, drive-barrel pressure check, bottle valve action test, distribution valve check
5 years of pressure testing for driver and fire extinguisher storage cylinders and a compressed air simulation spraying test for tube networks
9. Fire broadcasting system
System controls host background music playback, digital recorder recording, emergency access, partition call, line and live speaker setup and work, line maintenance
10. Anti-smoking systems
Portable fire extinguisher systems
Fire extinguisher configuration checks, floor layout mapping, establishment and maintenance of fire extinguisher maintenance files
12 evacuation instructions and emergency lighting systems
13. Outdoor route
Networked road friction wear and tear tests (depending on the customer's needs) are designed to check whether traffic is blocked and leaked。
B. Emergency maintenance and technical support
As a contracted client, fung-yung guangdong provides emergency maintenance services 24 hours a day, 365 days (in the case of lok, fukuda, namsan, salta within 60 minutes, in the case of boang, yonggang, longhua xinjiang, shin xinjiang, hyeongshan, etc.) and pre-disease inspection of equipment to keep your fire system safe and secure for 365 days。
Technical support included fire alarm system equipment flat layout calibration, fire system drawings, new fire equipment system circuits and equipment failure maintenance, fire equipment management, evacuation escape mapping, equipment improvement proposals, fire alarm mainframe operations training, fire equipment management training, fire safety management and evacuation escape first aid training, co-operation with evacuation exercises, co-operation with public security fire inspection, co-operation with company internal audit, co-operation with insurance company inspection and clearance。
For many years, we have maintained a balanced approach to every project, and we do not promote sharp profits in the industry, and we are opposed to illegal practices, such as the falsification of the truth, the theft of food, etc., because such businesses are “showed with a hammer”, and companies are unlikely to be able to sustain healthy growth, do a business and make friends. The client will always be our god and will always try to satisfy the client of every project. This is our past, and it is now and will continue to be an eternal goal
Guangdong ying construction co. Ltd
Managing director yang
Cell: 135 9042 0536 decline marketing
Qq: 179 339 0009
Mailbox: 13590420536@163. Com
Address: 46th floor, golden lake building, lake luo, shenzhen city
