Today, with the advent of the intellectual age, our lives are constantly changing, and more and more intelligent home-based products are beginning to gradually replace traditional household devices into life, of which the smart lock is a proxy. It can open the door without a key, and it can make life easier for people, thus creating a tide. So do you know how smart locks work? Here's what omis is saying:
The work of the smart lock:
The work system of the smart lock consists mainly of smart monitors and electronic locks. The two are placed separately and smart monitors provide the power required for electronic locks and receive alert and status information they send。
1. Fundamentals of smart monitors:
The smart monitors consist mainly of single-piece machines, clocks, keyboards, lcd monitors, storage receptacles, modems, circuit reuse and monitoring, a/d conversions, beepers, etc. It completes communications with electronic lockers, intelligent analysis and security monitoring of communication lines. Smart monitors are always receiving alert and status information from electronic lockers in fixed formats。
The smart monitor, through the door lock management software and the card transmitter, can write the information from the door lock to the card in the management software, and then set the information to the door lock without wiring. After the initial setting of the first series of level programs, the various open cards issued can open the smart locks within their purview。
2. Fundamentals of electronic locks:
The electronic locker, which is centred on a single machine and is equipped with the corresponding hardware circuit, completes the password setting, storage, identification and display, drives the electromagnetic implementer and detects its driving current values, receives alarm signals sent by the sensor, sends data, etc。
(a) the single machine in the electronic locker, after comparing it with the code typed and the password stored in eeprom, and if the password is correct, the driver's electromagnetic implementer opens the lock; if the password is not correct, the operator is allowed to re-enter the password for up to three times; if it is incorrect three times, the single machine alerts the smart monitor via the communication line. The single machine sends the current values of each lock-opening operation and of the electromagnetic implementer at this time as status information to the smart monitor, while the alert information received from the sensor interface is also sent to the smart monitor, which will serve as the basis for the intelligent analysis。
Source: http://www. Omislock. Cn/
