Shoes, student party favorite! I've had four of them on my lips. But the most mysterious thing today is that none of the 8th species has ever been seen, but they remember the last
Crosses 1 and 1 end of internal measuring knots, with the other end piercing in sequence and then jumping in empty;2 the same method is used to keep down, and after repetition the rest of the shoelaces can be plugged into the inner side for knot treatment;3 and the other purple shoelaces are punctured according to the same method;4 they go down to the bottom and then enter from the top;5 they select the chords of the shoelaces in the colour of the shoes and tie the extra shoelaces on the side。
One or two shoelaces are worn out after the tie is tied in them; two or two shoelaces are crossed and crossed out of the second hole; three, at this point, tighten the shoelaces in order to accommodate the junction as much as possible; four, the process of placing the junction between the junctions aggregates to produce the falcon, leaving the last hole; five, the final x-shaped treatment, which makes it easier to remove the shoe; and six, the remaining shoelaces are placed together in the shoe and they are closed together。
Double x knot 1, starting at the second empty space, from outside through the shoelace
2. X tie first the end of the white shoelace with a tie on the inside side; 3, blue shoe gang with the first hole, with the x-tie, through the cross of the white shoelace; 4, then the end of the blue shoelace with the knot; 5, with the remaining long line, with the possibility of making a ring around a small knot of the city and then passing through the ring from within。
Once the internal x knot 1 and the two-end shoelaces are consistent, each end comes out of the second empty space; the second, through the (1) hole, through the (2) hole, through the (3) hole; the third, repeated (1) (2) (3) step; the fourth, with the length of the shoelace, requires 90-95 cm, with the last remaining length as shown in the figure; and the fifth and final internal measuring knot processing, with the perfect configuration at hand。
The length of the tie is one straight tie, the length of which is left by the yellow shoelace, which comes out from the right face and penetrates in the direction of the dotted line; 2 - adjusts the shoelace so that it is not curled up in a single font and places the extra part in the shoes; 3 - also leaves a part of the white shoelace on the inner side, where the yellow shoelace is tied; 4 - wears the shoelace in the direction of the dotted line; 5 - adjusts the white shoelace so that its excess part is co-linked on it; 6 - the excess part is tied together with the yellow shoelace。
Slashed, one through the first emptiness and one through the third corner of the left side from the inside to the outside; two, shoelaces then crossed through the second hole to the right; three, blue shoelaces completed the slash; four, white shoelaces used in the reverse direction; five, continuing to draw white shoelaces in the same way as blue shoelaces; six, blue and white shoelaces eventually came out of the hole in the tongue; and seven, the appearance of coming out of the tongue section, which would make the feet more comfortable。
Following the formation of the ladder 1 and the adjustment of the length of the shoelaces, the shoelaces were pulled from the inside to the outside; the shoelaces were pulled from the outside to the distance into the second hole; the shoelaces, on the left, were worn under the shoelaces between the two blanks on the right, with the same lasers on the right, and the steps were repeated; the direction of the cross-laces on both sides was observed; and 5. The extra shoelaces were inserted into the sutures to be closed and the perfect configuration was in sight。
Finally, i'll get you a pentacle shoelace
One minute to build a pentacle shoelace:
