The following are the common failures of the supore electric meal and its maintenance methods:
1. Continuous heating after the electrocution reason for failure: the contact point on the thermostat is burned at high temperatures. Method of maintenance: separation of contact points with a knife or twig and cleaning of contact points with fine sandpaper。
2. Poor cooking causes of failure: thermostat failure, possibly due to the degradation of internal magnets. Method of maintenance: replace thermostats of the same type or attempt to adjust the thermostat。
3. Power fuse melting cause of failure: power plugs into water or rice soup lead to short circuits. Method of maintenance: cleaning and drying of water, and replacement of new plugs or plugs in cases of severe carbonation。
4. Common malfunction code e0: internal circuit failure requires inspection and repair of internal circuits. E1: no pots or pans shall not be applied to check whether the pans are placed correctly or are suitable. E2: igbt overheat protection, pending re-use after cooling of the rice or checking for damage to igbt power tubes. E3: overload protection, checking whether the power voltage is excessive, or taking pressure relief measures. E4: without pressure protection, check if the power voltage is too low or take lifting measures. E5: sensors open and check if the sensor is well connected or replaced. E6: the surface temperature is overheated, waiting for the electrical cooking to cool and re-use, or check the temperature of the surface。
This is a brief description of the frequent breakdowns of the supo food and its maintenance methods. In the maintenance process, care is taken to be safe from dangerous situations such as electrical shocks or burns. In case of problems that cannot be resolved, it is recommended that they be addressed in contact with professional maintenance staff。
