The encyclopaedia of the complete network has brought to you today the working principles of the wall-mounted boiler, the method of its use and the installation requirements of the wall-mounted boiler, which it is hoped will help you understand。
The work of the walled boiler
1. When the wall-mounted boiler begins work, the wind engine system will give priority to the initiation of negative pressure differentials in the combustion chamber where the wall-mounted filtration is filtered, and after some negative pressure differentials, the instructions will be transmitted to the water pump, the activated pump will send the direction of the negative pressure size to the gas ratio valve and release the amount of gas corresponding to the negative pressure difference。
2. The wall-mounted boiler is a complete system of heating, so many parts of the fittings are controlled*, and the combustion chamber must have some negative pressure differential in order to transmit the information to the gas-rate valve, the gas-scale valve will be operational, and the smoke sensor will cut off the transport of the gas-scale valves and ensure their safety。
Use of wall-mounted boilers
1. Check that the links to the wall-mounted boiler are correctly linked and have been tightened。
2. A refilling valve may be closed when then open the walled boiler, so that the pressure in the boiler reaches 1. 5 bar。
3. Power supply to the wall-mounted boiler will require heating at around 60 and hot water at 40。
4. Open gas valves, and the wall-mounted furnaces start automatically to ignite and operate automatically according to temperature。
Installation requirements for walled boilers
1. The heating system itself is a complete, independent system and, during its installation, the construction programme needs to be based on the specific size of the walled boiler and the actual condition of the house. The location of the emissions must be set and the complete wall-mounted boiler equipment set in a position that avoids wind and rain and does not affect its normal useful life。
2. There is much to be considered for the installation of a heating system for this wall-to-wall boiler in the new undecorated room, such as pipe connection routes, poaching, etc., which needs to be synchronized with the renovation of the house, and the installation of heating pipes, gas pipelines and household water pipes must ensure that the gaskets and biomass belts are filled to prevent run-off leaks。
3. No space is required for overhaul during the installation of the walled boiler. The flue pipe and the wall-mounted boiler must be closely connected to ensure that the flue gas is not leaked during the discharge process and is fully released outside the room. The installation of a domestic wall-mounted boiler must not leave every detail unattended, which relates to the safety of use and the heating effect of later periods。
