Main duties of the welder position (12 general)
In a rapidly changing modern society, more and more people are exposed to job responsibilities, which are a visualized job description that can be grouped into different job types. Do you know the format of your duties? The following are the main duties of the electric welder position collected for you, for information purposes only, in the hope of helping you。
Main duties of the electrician post 1
1. Be familiar with the plan, define the tasks, maintain the position, ensure the timely completion of production tasks and be responsible for the quality of welding。
2. Welding of pressure containers must be carried out on the basis of an operation approved by the welding examination certificate, which is strictly prohibited。
3. Each requirement for welding process and welding regulation, pre-welding proofreading parent, ramp, welding (welding, welding, welding)。
4. To firmly establish the concept of quality first, to conduct careful work, to conduct rigorous self-censorship, to ensure weld quality and to insist on:
4. 1 “four strict”: strict use of welds; strict welding norms; strict preheaters, welding temperatures; strict layer removal of plumes and spray。
4. 2 “six unwelded”: materials, welds are unwelded; ramps, welds are unwelded; welds, welds are unwelded; welds are unwelded without good `wires'; welds are poorly assembled; roots are unwelded。
4. 3 “two hard”: too hard to look (equilibrium, smooth, welding) and inherently hard (on demand for access to detection)。
4. 4 strict implementation of the “three-inspection” system: self-inspection, supported by mutual inspection, and certification and referral to prosecution
5. Unqualified weld restoration shall be carried out strictly。
6. Welding protocols must be followed, equipment and tools must be carefully maintained, civilized and safe. (b) to ensure that after-school locks, wires, clean-up, clean-up and secure work sites are clean, that welds are not lost, that welds are saved (welds, welds, welds), that welds are recycled in a timely manner and that new welds are replaced by welds。
Main duties of the welder position 2
1. Welders must be certified for employment with professional and safety training。
2. The correct use of labour protection goods at work and their reliability。
3. Careful pre-operational inspection of the integrity of equipment and tools. Whether the shell of the welder is reliable ... The welder must be well insulated。
When abnormalities in welding equipment are detected during work, the operation is immediately stopped and failure does not preclude non-operation。
5 the maintenance of welding equipment must be done by professional staff and the unauthorised removal of equipment is prohibited。
6. Welding materials should be centrally managed and not dumped。
7. Safety belts should be used correctly when operating at high altitudes and operations should commence with security guarantees. (c) safekeeping of accompanying devices to prevent casualties。
8. Comply with the company's rules and regulations and refrain from violating the laws and regulations of the company。
Main duties of the welder 3
1. Licenced to take up work, to perform electrical, welding and cutting work, to observe labour discipline and to work on time and at work。
2. To perform cutting or welding of works and materials, in accordance with ... Requirements of drawings and processes, in order to ensure the quality and timely completion of processing tasks。
3. Maintenance of equipment and ancillary facilities。
4. Strict implementation of the operating protocols, the pressure gas safety inspection protocol, the gas cylinder safety inspection protocol, etc。
5. Properly dress and prepare for work, fire and safe production。
6. Keep the workplace clean and clean and civilized。
7. Closely cooperate with other types of work in the preparation of equipment, works for inspection and repair and acceptance。
Main duties of the welder post 4
1. To comply strictly with the rules and regulations governing the security technology of the post and to comply with the instructions of the duty station and perform its tasks。
Ii. Full familiarity with and mastery of all equipment, tools, techniques, performance, operating procedures. General business knowledge and operational skills of welding are familiar with and mastered, and work is regulated by drawings and construction requirements to perform the production tasks assigned to the post。
(c) maintaining a certificate of employment, properly wearing labour insurance items, periodically inspecting all equipment, tools, etc., and detecting problems in a timely manner and ensuring safe production。
Iv. Exercising savings to recover and use surplus materials, decreasing consumption and working to reduce production costs。
V. Precision, technological research and technological upgrading, while maintaining the cleanness of the operation site, the cleanness of the site and civilized production。
To complete the other tasks referred to him by his leadership。
Main duties of the welder position 5
1. In strict compliance with the relevant provisions of the act on safe production, welders are required to obtain professional training in the security and supervision sector and to obtain qualifications for special operations personnel
Ii. They must receive training and education in day-to-day safety and operational knowledge, and acquire relevant laws and regulations, safe production and expertise
Iii. Responsible for submitting to the head of the unit the labour protection items required for the welding industry, which shall be performed in strict compliance with the requirements
4. Responsible for ... Welding operations within the plant area, in compliance with the system of intra-plant shifts, must maintain a job and may not accept employment on a part-time basis without the consent of the head of the unit
To perform routine repairs and maintenance of electrical welding equipment, facilities and tools to ensure that they are intact and that normal operations are not affected
(vi) to put an end to the private operation of welders by non-professionals and to the refusal of others to operate and command them
Vii. Strict compliance with the specific requirements of the regulation of welding
8. When operating in flammable explosive sites and public gatherings, strict fire authorization and quarantine protection against fire and explosive accidents are required
Ix. Strict compliance with emergency response plans for accidents
X. Overall responsibility for all welding work in the unit
11. Other arrangements for the head of the enterprise are carefully implemented。
Main duties of the welder position 6
1. Production and operation: welding, gas cutting, plasma cutting in non-standard equipment parts processing and routine equipment maintenance, completed within specified working hours。
2. After processing, self-inspection and special examination of the design drawings must be performed to ensure that welded parts meet the design requirements when assembled and debugged。
3. Responsible for the inspection and recording of assigned media in the region。
Main duties of the electrician position 7
1. Before working, check whether welders and metal tables have a strong site. The shell of the welder shall have a separate, well-defined surface line. Groundlines should not be connected to buildings and pipes. In addition, on-site flammable items (such as cotton veils, gasoline, etc.) should be removed。
2. The insulation of the 'hand handle ' of the electrode clamp shall be good or repaired immediately. If this is really not available, it should be replaced。
3. Welding lines shall not pass near acetylene, oxygen or flammable gas pipes, nor shall they be in the same ditch as these。
4. Welding of large pieces and warmed parts shall be carried by two persons. Welds should be placed firmly in case of collapse or fall。
Welding in metal containers shall be supervised by at least one person outside the packaging。
6. When slag is removed, protective glasses shall be put on to prevent slag from spilling into the eye。
Upon completion of work, welding sites should be checked for mars remnants. Weld sanitation is regularly cleaned and safe production is done。
Main duties of the electrician position 8
1. Welders must wear work clothes, insulation shoes and all protective items such as protective gloves。
2. Welders are to prevent water leaching, cable breaks are to be repaired in a timely manner and the wires cannot be attached to buildings。
3. Welding operations shall have a blindfold so as not to cause eye damage to others。
4. The cables must be fixed, they must not be loose, welded and placed together。
5. Air welders, in order to scrutinize the various tools, must not be exposed to oil。
6. Protective gear such as glasses, gloves, etc. Shall be used at work。
Seven, acetylene bottles and oxygen cylinders should be set in two places and placed in good ventilation, strictly forbidden in oil pollution, smoke, high temperature, etc。
Electricity and gas welds are not allowed to work at the same location, and acetylene tubes are not allowed to cross the road。
9. Light fire quickly and close the gate as soon as fire returns。
10. Tests on the face are prohibited when adjusting the blowpipe switch before starting work。
11. When welding or cutting an empty tank or tank, the tank or vehicle shall be washed with water before work begins。
12. When acetylene welds various cylinders and seals, keep an eye on them, and when welding tubes, open both ends of the switch, and the blowers of the flame shall not be placed in disarray。
Smoking around acetylene and oxygen bottles is strictly prohibited。
14 wind pipes, oxygen cylinders operating in the winter, which are not available for roasting when the air is frozen, are used for 40. The water below c is cooled。
15. When the oxygen cylinders move, cover them and do not roll around while carrying them。
Wind cylinders are prohibited from being placed at temperatures above 35c and may not be placed with oil-containing, leaking equipment。
Oil pollution is strictly prohibited by the means used to regulate the wind doors and the amount of oxygen in the bottles is clearly marked。
Once completed, tools and supplies will be fully equipped and sanitation provided。
Main duties of the electrician position
1. 1 the electrical welding and gas cutting operations are performed strictly in accordance with the process requirements and relevant technical standards。
1. 2 on its own initiative and in coordination with the positions concerned, operations are carried out in strict compliance with the company's requirements for special operating tickets, security measures and security analyses to ensure their safety。
1. 3 the correct operation of the various types of welders for welding operations, the proper use of the repair and maintenance of electrical (gas) welding and gas cutting equipment, appliances, the strict application of safety protocols, the elimination of all insecurity and the safety of construction。
1. 4 welding is checked, welding is cleaned, welding is carefully checked for the `bottle processing and assembly quality ' of the welding, and welding is denied to those who do not meet the requirements。
1. 5 the electrical (gas) welding, gas cutting operations are performed strictly in accordance with operational requirements and relevant technical documents. Security gear was worn to ensure the safety of construction。
1. 6 the site was cleared, tools, machinery and equipment were counted, fire hazards were cleared and the site was cleared。
1. 7 on its own initiative and in coordination with the positions concerned, special operating tickets are required for the duration of the operation in strict compliance with the requirements of the company, and security measures and security analysis are required before the operation can be conducted to ensure its safety。
1. 8 active participation in operational training learning and efforts to improve technical theoretical and operational skills。
Main duties of the electrician position
The project manager works under the leadership of the general manager of the company, whose main responsibilities are:
(i) a determined implementation of the state's policies, regulations and the relevant regulations of enterprises, with overall responsibility for the production direction and administration of projects。
2. As the head of the unit at the construction site, to coordinate with the construction unit, the design unit, the supervisory unit, the relevant government department, etc。
3. Chairing the overall project department, with overall responsibility for the project's production schedule, quality of work, safe production, civil construction, cost-effectiveness, etc., and ensuring the completion of project management indicators。
Organization of the organizational design for the construction of engineering projects, including the engineering schedule plan and technical programme, development of safety, quality assurance plan and civilized construction measures and organization and implementation。
5. Responsible for equipping the project department with human, financial and material resources, organizing and building up the project's quality of work, safety and fire safety assurance system, and establishing the lines of responsibility of the project department manager. Business contacts and economic exchanges with the various functional units of the company are made and regular reporting is made to the competent authorities。
Vi. Oversee and supervise the organization of works in the units covered by the project, the outsourcing of contracts and the progress, quality, safety, cost and layout of the work to be awarded, and the acceptance and acceptance of the examination. Organizes and participates in twice-monthly security inspections of construction sites and carries out corrective reviews by dedicated personnel。
Organization of quarterly (monthly) construction plans, including plans for the use of labour, materials, machinery and equipment, and measuring devices, in accordance with the company's annual (quarterly) construction production plan. Supply, demand and lease contracts are concluded accordingly with the relevant authorities and are strictly enforced。
Viii. Strict corporate financial systems to strengthen project department finance and budget management. The relations of interest between the state, the company, the collective and the individual are properly dealt with in a practical manner。
Main duties of the welder position 11
Operators are required to hold welding certificates or to undergo professional training。
B. Operators must be familiar with the basic performance and technical requirements of welders。
C. Operators must be faithful and responsible and skilled in the operation, maintenance and maintenance of the equipment。
D. Operators must continue their efforts to learn and share their experiences in order to improve their quality。
E. Confirms whether the welder's landline is fully connected to the welder and whether the welder and the welder are wired。
F. Operators should concentrate on welding operations, wearing protective gear to ensure their safety。
G. Welding operations are carried out away from flammable and explosive objects and, as a result of welding, alert the surroundings。
H. The work site should be kept dry and well ventilated. When moving welders, the power should be cut, and the `movable welders ' of the tractor cable should not be used。
I. In welding, no regulation of electrical currents shall be permitted, and the currents of the welding machines shall be regulated with handles at the time of welding, without being too fast to damage the regulator。
J. Once welding has been completed, the power supply shall be cut immediately, and the welding switch shall be shut down to clear the welding power and the ground, respectively, in order to avoid short circuits when the gates are closed。
Main duties of the electrician position 12
The technical staff, under the leadership of the technical director of the project, shall have the following main responsibilities:
I. Careful learning, researching and continuous technological upgrading。
2. To familiarize themselves with the drawings, to obtain an overview of the work, to draw up a plan layout of the construction site and to organize the site。
Participation in drawings hearings, hearing and resolving problems in drawings, encountering major technical problems, is responsible for liaising with a and the design department and resolving them properly。
(d) to insist on the construction of the drawings and, prior to the construction of the sub-project, to write down the technical basis。
V. Completion of the construction diary and receipt and inspection records for the hidden works, the preparation of technical information and the management of the quality of the works in cooperation with the mass examiners。
6. Timely issue matching of components。
Vii. Timely budget for engineering increases and decreases, preparation of material and monthly production plans。
