It's been a long time since mrs. Jang had her originals, but there's a lot of things she wants to send, but when she's lazy, it's behind her head. I recently found out that i could get a reward, and i just recently did something that i wanted to get out of the sun, so i wanted to see if anyone would give me a reward。
Before going back to the cause, let me start by saying the results, but eventually there is a problem, not a previous failure, but a problem with the focus. Only 17 paragraphs can focus automatically, 24 paragraphs can be avoided, and the rest of the focus cannot be focused, but only the motor turns around, which is tired. I don't know if it's a wiring failure or if there's trouble elsewhere. Interested friends can keep looking down, uninterested friends can stop wasting time. Don't like it。
I'm not a tutorial. It's a self-help process. There's a lot on the web。
Reason:
Friends have an energy suite, which is 17-85, which hangs off a long time ago, and malfunctions are not automatically focused, sometimes to the top, but they press the fast door to tell the wrong story: the camera and the camera fail, and then they turn off the camera and go back. Friends went to the store for a good price, so they had to take it back. He had recently searched the internet and found that the same camera failure was widespread, that the internet had its own maintenance and that it cost only $10 and a few bucks of lined up and a postage fee. A friend is a crippled party, he can't do it himself, he can't do it, so he finds me, and i'm afraid he might ruin his reputation. If i'm done with publicity, i'm afraid the cheeky girls will send out a good man's card. Don't blame me if i can't fix it, or if i can't fix it, don't give me publicity. Don't fix girls' computers in college too much. I didn't find them using me until after graduation。
Process: (photo taken by cell phone) no more bullshit. Work. That's what's going on down there。
Two of the rows bought by the treasurer, one for redundancy and the other for a share of freight. I'm starting to forget about it, and then i'll take the rest。
Tool, remember the ten-dollar silk knife. It's been six or seven years. And finally, i used a five-pack screwdriver that x-boo bought, used to break the phone, the purple one, the 8. 8 package。
Okay, start taking it apart。
There's a lot of sequences on the web, so i don't sign the silk
Wrestle the top four and the side
And then slowly lift up the metal ring and look at the back
The first part to remove
Pull the white line on the chart. Yes, it's unplugged, and then the whole plastic cap can come up
Show the main board, i don't know if it's the main board. Pull out all the lines. Right, the two above the right side are able to tear down the lines by flipping that crush, and the biggest line is two black buttons next to it。
Take the look of the main board and continue to tear it down, looking at the tutorial with eight screws, and then take the plastics below。
Take the rubber condom above the curvature ring, remove the metal chips and the wire
You can take the jomada. It's down there
Heads of jomada (top chart)
Opposite on joomada (top chart)
Remove focal and aperture components。
At last, we've seen the arctic line. It's broken in two。
So, just for an hour, every step of the way is careful。
Look at what's taken down
There's a lot of silk. I forgot all of it, that's all。
Change the line, get the tools。
This is after the new line welded. One of the points in the lower right corner went a little too hard and stopped for a second, and the needle collapsed under the plastic
All right, put it back. And it was hard to go back and forth for two and a half hours, and i was going to crash, and many of the parts were in the direction, and they were broken down, they were removed, they were discovered and left behind, and it wasn't right to go back and forth, they were wrong, they came and went, they didn't even take pictures. So remind your friends who want to try, before each step is removed, it is best to take a picture of the direction and location。
The moment of excitement came when it was finished, and the results were disappointing. I don't know if there's a problem with welding lines or something else. But the meal is fixed and four hours of work is always worth it。
Finally, the whole process felt and needed attention。
Feels like: tired. The old waist is dying. It's so sophisticated, it's too silky, it's good, it's good. Pretending to finish feels better than playing lego。
Places to be noticed: when lined down, be careful, with a tin-sniffer, not long enough for iron. I'm basically only here for a second, otherwise plastics can be deformed. Each time a widget is taken, remember the direction and position of the gap. And, dust, it's impossible not to go in, but to blow。
In conclusion, i wish my friends success in their efforts, if only with care。
