Hydraulic-free bricks are also called hydraulic bricks. Hydraulic-free bricks are hydraulic-powered bricks and are the main type of large bricks. It is also important to distinguish between fire-free bricks made by mechanical vibrations. But let's not think that a liquid-pressed brick machine does not need to be shaken, and all brick-making machines need to be fully integrated by vibration. In general, hydraulic burn-free bricks are larger than mechanical vibrations, and prices vary considerably, and are much better than machinery in terms of the speed and quality of brick output, but cannot be generalized. However, liquid-pressed bricks, especially large-scale liquid-pressed bricks, are already the dominant type of bricks, with lessons learned from the development of external bricks。
First of all, the structural features of the hydraulic burn-free bricks are:
1 the classic vibration pattern is particularly appropriate for the production of high-intensity blocks, bricks, etc. Shorter and more efficient form cycles。
2. A vibrator for the exclusive use of high-efficiency vibrators, with a strong vibrating force and a better product。
3. Large formations can produce a wide range of cement products。
4. Forced mechanical positioning, fast, even, accurate and consistent。
5. A fully automated plc control system, an interactive human interface, a control system configuration security logical control, production procedures and failure diagnostic displays。
6. Production costs are low, and raw materials can be used to the fullest extent, such as sand, stone powder, ash and slag。
And then we'll introduce the installation of a hydraulic burn-free brick machine
The machinery leaving the plant was tested at the plant in accordance with the relevant regulations, but for reasons such as long transport and long-term placement, the following checks should be carried out for the installation of the fire-free bricks:
1. Check whether the bricks are damaged or deformed during transport (with particular attention to hydraulic piping)。
2. To find out if there has been any relaxation of the hardware in the main parts of the brick machine。
3. Check the brakes. Whether the tanks and lubricating points of the vibrating table are refuelled as required and whether the amount of oil is appropriate。
4 and complete cleaning of the fire-free brick machines, and sports departments before testing them
5. The machinery shall be operated with all protective shields and floor covers。
6. Inspection of electrical sections to prevent electrical leakage, short-linking, etc。
7. The station is strictly forbidden in the direction of the electric power plant, in order to avoid a car crash。
8. In the event of an anomaly in the machine being discovered, the parking inspection shall be immediately removed。
9. Do not open a feeding unit when the bricks are not operational, in order to avoid loss of machinery due to overload
The relative slide is refuelled as required. If, due to transport requirements, the machine is to be disassembled into a formable device, a delivery unit, a delivery unit, a brick-out unit, a coding unit, a phase control device, etc., shall be installed in a assembly relationship。
Since its establishment, my company has been rated as having a high level of product quality that can be trusted by enterprises, advanced units, re-contracting and creditworthiness, and is highly dependent on and appreciated by a wide range of users. In particular, hydraulic burn-free bricks have been at the forefront of their peers。
