The way in which remote controls are matched as one of the important parts of modern vehicles has been a major concern. Especially after the purchase of the car, how to match the remote control correctly so that it can be used properly becomes a task that the owners of the car must face. Depending on the type of vehicle and the type of remote control, the mode of matching the remote control is also different and can be divided into two types of equipment matching and manual matching。
Equipment matching
Equipment matching is a relatively simple remote control matching, which relies mainly on a code decoder to complete the matching process. The owner will be able to easily match the remote only by following the decoding device's cue and performing the corresponding operation. In the process of matching the equipment, the decoding device played a crucial role in decorating the signal from the remote control and converting it to a signal that the vehicle could identify, thereby matching the remote control with the vehicle。
1. Types of decoders
There are a variety of decoders currently common on the market, including the 808 decoder and the n51 decoder. Both decoders are essentially functionally the same and are capable of completing the decodering of remote control signals, although the specific operations may differ during their use。
Matching process
In the case of the 808 decoder, the owner is required to connect the decoder to the obd interface of the vehicle when matching the remote with the device. Upon completion of the connection, the owner of the vehicle will only have to open the ignition switch of the vehicle and operate as a decoding device, and normally will have to perform a few simple key-button operations to complete the remote control match。
It is important to note that not all models can be matched by equipment, and some models may require additional operations, such as matching the remote with the vehicle's radio frequency chip, which can only be used properly。
Ii. Manual matching
Compared to equipment matching, manual matching is a relatively complex method of matching remote controls, which applies mainly to some national models. In the process of manual matching, the owner needs to complete a series of operations in a certain order, and in the course of the operation, attention needs to be paid to the consistency of the operation, which may result in a match failure if any error occurs during the operation。
Matching requirements
Before a manual match is made, the owner needs to know whether the model that he drives supports the manual match, and if so, the specific operational steps of the manual match and what needs attention in the matching process。
Generally, manual matching is cumbersome, and the owner needs to complete a series of operations within a specific time frame, such as the opening of the trunk, the insertion of a ignition key, the operation of a ignition switch, the operation of a certain level of operation of the door and the press of the red key on the remote control, which can only be successfully matched with the vehicle。
2. Biadi f3 manual matching process
In the case of biadif3, the following is the manual matching process of biadif3:
1. Open the trunk and turn on the light of the trunk。
2. The ignition key is inserted into the ignition hole to perform the operation of the ignition switch, which requires a transfer to the position of on。
3. In the position of on on the ignition switch, the owner of the vehicle is required to perform certain operations with respect to the doors, either open to the driver's seat or open to the side driver's seat。
4. In a state where the door is open, the owner is required to press the red key on the remote control, and when the red key is pressed, the door is required to be automatically closed for a certain period of time and, if the door is not automatically closed, the matching operation is required。
It is important to note that in the process of manual matching, the owner needs to maintain continuity of operation and not too long a interval, and generally the owner needs to complete a series of operations within 30 seconds, which, if too long, may lead to failure of matching。
Future directions
As technology evolves, there may also be some change in the way remote controls are matched, and traditional equipment matching and manual matching may gradually be replaced by more intelligent matching, such as the use of smartphone applications to complete a remote control match, which the owner can easily complete by simply operating on his mobile phone。
In addition to this, there may be some automated matching of remote control systems in the future, such as the use of vehicle network technology to achieve a smart connection between the remote control and the vehicle-mounted system, and the remote control of the remote control of the remote control can be achieved by the owner by simply operating on his mobile phone。
In the area of remote control security, the future remote control matching system may also introduce multiple authentication mechanisms, such as fingerprinting, face recognition, etc., for the identification of the owner of the vehicle, which will enable the remote control to function properly, thus greatly enhancing the security of the remote control and preventing its malicious use by others。
In addition, in the design of remote controls, future remote controls may also use some environmentally friendly materials, such as recyclable materials, to reduce the generation of e-waste and meet current societal environmental requirements。
