There are many advantages to an electric stretcher:
1. Grid-resistant rubber is used on unorbited wheels, with no visible wear and tear on 300,000 operational tests。
2. An overheating protection device is in place, and the temperature of the valve electric device is increasing at any time during frequent use and can reach about 200 degrees inside, when the power is automatically cut off and shut down, and when the internal temperature is reduced to around 90 degrees, the electrical power is back in operation to ensure that the power is not burned to extend the utility life of the power plant。
3. In case of stop-and-go return, the door can be automatically stopped and returned when the door is closed or when the walker is 20cm-30cm。
4. Infra-red protection: when a person climbs the door, the system calls the police immediately, thereby ensuring the safety of the door。
5. The light is infinite, it is not slimy, it is not corroded by polluting gases, it is not rusty and it is long。
6. Impact resistance, distortion resistance, grind resistance, thaw resistance, sun resistance, vulnerability to aging, long operational life, and protection from thunder and rain。
The stretching door is widely used on the basis of these advantages, as well as the advantage of breaking through over traditional doors。
In some cases, the vertical cross-sticks of the electro-extreme stretching doors are interconnected to the vertical plane, the poles are too closely organized to perform decorative designs, so that the structures are monotonous, cross-connected to the decorative surfaces, the poles are too condensed to perform decorative designs, so that the structures are unwieldy, decorative and beautiful; while the penetrating cross-strengths, although they offer a large amount of decorative space, do appear to be too rigid and rigid。
In order to achieve the above, sub-column proposes a simple-structured, outward-looking, electro-extreme chaining institution with the technical option of an electric stretching door chain, including a door frame, with a fixed axis at the lower side of the door frame, with a slide axis on the upper side that can slide along the door frame; cross-strength activity between the lower sides of the two frames, with the adjacent cross-strength end of the pole floating through the floating. The inter-axis are chained together and the inter-joining poles are connected to the fixed axis of the door frame; the upper side of the two frames is connected by the active side of the pole, the upper end of the pole is attached to the sliding axis of the door frame and the lower end is attached to the floating axis of the cross-bar below the door frame。
The electric stretcher is a new type of door driven by an electric process that opens or closes in a stretching manner. It is being expanded and applied increasingly with its many advantages, such as the ease with which it can be opened, shaped, electric control, etc. The basic structure of the existing electrical doors consists of the head of the machine and its associated extremities, part of which is made up of multiple door frames linked to its cross-axis by a two-storey or two-storey or plattered cross-bar, with walkers at the bottom of the door frame。
The main element of the electro-extreme stretcher is high-intensity zinc aluminum alloys, which are processed in surface electro-simulation processes, brightly coloured and long-lasting; it is new in its structure, with a large black and stable colour; it has a longer lifespan; and it is wider in its lower and lower symmetry, which makes it more stable and more atmospheric. The clinker link component is formed at a time with high-molecular material of a performance, the bolts of the link, the stainless steel of the screws, and the high-strength nylon-resistant grinding caps of the clinker; the walk-through system is trajectorized or non-orbited, the in-orbiting is robotic computer control, e-navigation, automatic correction; the soft drive and collision resistance make the product more efficient; and the electronic display system: the welcoming word, date, clock is visible。
1. The main skeleton of the stainless steel kiosk: the use of fine steel (aluminium alloy or stainless steel) dragon bones, softness, high strength, resistance to wind pressure, ease of movement and impotence to deformation
2. The top of the stainless steel kiosks in the interior: the colour plate buttons, the pure white interior air, and the modern and luxurious air of the stainless steel position
3. Equipment set-up within stainless steel kiosks: with double switches, solar lights, power, five-hole plugins, pellets, telephone plugs, air-conditioning plugs, web lines, ports, so as to facilitate mission staff meeting different requirements in a different mission environment。
4. The stainless steel kiosk interior wall: the coloured steel plate, the aluminum plate, the stainless steel plate may be used as the desired inner wall material to make you feel different
5. The stainless steel kiosk exterior wall: carbon floats, polyesters, polyvinyl fluoride (pvdf and plastic solvents) have been introduced, and 20 years of manipulation does not result in paint loss, dark colour, etc。
6. The stainless steel kiosks, doors and windows: plastic steel doors and windows, stainless steel doors and windows, aluminium alloy doors and windows, with different sizes, are freely chosen by the user to allow the stainless steel kiosk theme to satisfy the air of the assembly。
The determination of the length of the electro-extension door is based on the actual size of the door hole, some of which are designed on the basis of drawings, but sometimes the actual terrain is not consistent with the size of the drawings, to ensure the accuracy of the door size, to check the drawings on site and to check and confirm the size of the door hole。
The exact measurement and determination of the size of the hole in the field shall be based on the installation of a horizontal vertically in the hole by the electric stretcher door, followed by the guarantee of the electric stretcher door and the vertical surface. The height of the hole in the same horizontal line should be measured against a horizontal line, the width of the hole in the same vertical line should be measured, the upper top of the door and the upper of the electric stretcher door should be spaced to ensure that the electrical stretcher does not friction with the surroundings of the door, and the material of the electric stretcher door is easily scratched, affecting the aesthetic and useful life of the electric stretcher door, except for the absence of scratch marks from the rasil。
(b) composition of the electric stretcher: the electric stretcher is composed mainly of the door, the driver, and the control system. The work of the electric stretcher is based on the use of stainless steel and aluminium alloy materials in the door, the application of parallel quadrilaterals, and the application of flexible stretching. The drive is specially motor-driven, snail snail wheel speeds are slowed, there is no manual clutch, when power is out, it can be activated manually, the control system has a control panel, the button switch, and it can be fitted with wireless remote control devices according to user needs. You can have a scroll screen to display the text content. It can also be equipped with a smart infrared double-prospect anti-crash device, which automatically returns to operation in person or alien 20-30cm, thereby safeguarding the safety of vehicles and pedestrians。
In order to win the favor of a large number of consumers, electric roll-gate manufacturers have come up with a few tricks to attract consumers. Here, let's talk about common sense when buying a roll of gates! Consumers have the following knowledge when buying:
Safety is important for consumers. How? Most of the rolls, because of their large width, are locked with a bullet crossbar. The lock is easy and cheap. But it's safe. Easy to be destroyed. However, the house is occupied. Because the general door is louder. It is also possible to choose such lockers. In the case of unguarded holding rooms such as warehouses, the choice of locks above is clearly insufficient. High-intensity materials and pry-proof rolls should therefore be selected。
Electric stretch door companies, users are afraid of the sound of a closed door, and when the wind blows, it goes on and on, and sleeps well, it is not acceptable for the dream-seeking door consumers. So when you buy, you have to pay attention to the disadvantage of traditional rolls. There is a living room where you can choose the door of the silence process。
In the early stages of the development of the rollergates, the traditional rollergates open the locks, which are now improved, can stand, and are rocked, especially convenient, and increasingly styled, and when purchasing consumption, remember to choose what to use
The electrical stretcher doors, if used for more than a year, have the potential to be rusted at the point of contact by the use of the environment, using good lubricating oils, each of the sales and points of contact, adding lubricating effects, and keeping in mind the small holes。
The duration of the electric stretcher is such that there is now more or less dissatisfied if the correct method of use is not observed and if maintenance is not normally provided. The correct method of use is not to use too much power to shut the door when entering or leaving the door, let alone hit the door, to open the door remotely, to use the electric stretching door in use and to maintain it once a year。
