Fack cleaners are a dry dust removal device that is suitable for small, dry, non-fibrous dust removal. The filters are made of textile filters or non-textile filtrations, using fibre-filtered dust filters, gas in dusty gas into bag cleaners, large particles, major dust, falling into dust plume due to gravity, dust-containing gas passing through filtering material, dust being blocked, and gas purification。
General new filters are less efficient than dust removal. After a period of use of filters, due to the effects of filtering, collisions, detention, diffusion, electrostatics, etc., the filter surface area is covered by a dust layer called the first layer, which later became the main filter layer of filters, relying on the first layer, with greater filtering efficiency. As dust accumulates on the filter surface, so does the efficiency and resistance of the scrubber. When the pressure on both sides of the filter is very low, some small particles that have been attached to the filter are squeezed over, reducing the efficiency of the scrubber. In addition, the high resistance of the scrubber would result in a significant decrease in wind volume in the dust removal system. Therefore, when the resistance of the scrubber reaches a certain number, it is timely to clear the dust. Ash must not destroy the first layer in order not to lose efficiency。
The fabric of the bag cleaners consists mainly of upper boxes, central boxes, lower boxes (ash fights), ash removal systems and ash disposal units. In addition to the correct selection of the filter material, the ash-cleaning system plays a decisive role in the bag-sweeper. To this end, the ash approach is one of the characteristics of the distribution of the bags and is an important link in the operation of the bags。
